Saturated polyester resin for special adhesives PT-17

Apply : screen printing Adhesives; Metal sheet and film lamination; Adhesives; Adhesives for different substrates

Features : Ink bonding material; excellent adhesion; FDA certification CFR175.105, 175.300 and 176.170

Performance

dissolve Method
Put all the solvents in the reactor, while stirring, put the PT-17 solid into Reactor; after adding all components, raise the reaction temperature to 90-100 degrees, if using MEK and acetone, the reactor temperature rises to 50-60 degrees, stir for two hours, the maximum pressure of the reactor: 2kg/cm ², turn off the heating system, continue to stir for an hour and a half, let the reactor cool down naturally, stop stirring; filter the solution, put it into a 200kg barrel

applies Solvent : EK, Toluene, xylene, solvesso, cyclohexanone, acid gas cellulose ester, isophorone, DBE

from Original formula : Prevent Back Stick Screen Printing Adhesive

PET or PVC film composite, steel or PET film Formula: PT-17+PT-65

sticky Mixture formula : PT-17+PT-65+Isocyante[L75]

for soft Adhesives for flat cables
PT-17S(50%) 30.0part
PT-65S(50%) 20.0part
TIO2 18.0part

Flame Retardant (Br) 30.0part
Additive                                                                                                                                                                         2.0 part

metal Foil Adhesive Recipe : PT-17+ solvent (16~20%)+L75 (5% of solid content)

Packaging ：25KG/box

sticky Mixture formula : PT-17+PT-65+Isocyante[L75]

for soft Adhesives for flat cables
PT-17S(50%) 30.0part
PT-65S(50%) 20.0part
TIO2 18.0part

Flame Retardant (Br) 30.0part
Additive                                                                                                                                                                         2.0 part

metal Foil Adhesive Recipe : PT-17+ solvent (16~20%)+L75 (5% of solid content)

Packaging ：25KG/box