Polymer pump truck lubricant Concrete pump truck lubricant manufacturer

1. Product introduction

Yulong pump truck lubricant is specially designed by our company for concrete truck pumps and ground floor pumps. A new polymer material designed to lubricate pipes before pumping concrete. This material can replace the original lubrication pump mortar. At the same time, the pipe lubrication effect is better, increasing pumping efficiency and extending the life of the pump truck; because it can replace lubrication Pumping mortar can also reduce material waste and play a role in energy saving and emission reduction.

2. Product features

Fast dissolution

Low dosage

Good moisturizing effect

Three , How to use

1. Be sure to add the corresponding amount of water to the hopper of the pump truck first, slowly add the corresponding amount of pump lubricating agent, and stir continuously until it is completely dissolved. (About one minute)

2. Then start the main pump for pumping. After the lubricating agent is pumped, pump the concrete directly

3. After the lubricating agent is used to moisten the pipe, it should be discharged directly from the pouring project and cannot be mixed with concrete.

4. Dosage: If the pumping distance is less than 50 meters, use one bag (300 grams). If the pumping distance exceeds 50 meters, use 2-3 bags (600 grams). -900g),

The water consumption of each bag of pipe moisturizer (300g) is 30kg.

</p