Pipe moisturizer can replace mortar to moisturize pipes, and in terms of cost and method of use, it is more economical, labor-saving, and environmentally friendly than mortar.
First of all, what all pump truck owners are most concerned about is of course the cost of use. Is the lubricant expensive to use?
To put it simply, what used to cost hundreds of dollars to use mortar can give you perfect results with just a few dollars using moisturizer Solution, the cost of use is not reduced at all. The current market wholesale price of polyacrylamide is about 10,000-12,000 yuan/ton, and a pump truck under 60 meters only needs to use 200-300g of polyacrylamide and 30Kg of water to achieve good moisturization. Regardless of the effect, it only costs less than 5 yuan. Of course, there are other ingredients in the lubricant, and the actual cost of use is even lower.
Secondly, in terms of usage method, the lubricant only needs to be added to clean water before use, and then stirred evenly. There is no need to transport it, which reduces the cost. Shipping costs of mortar. For pump trucks, the pipes should be moistened in advance before the arrival of the first truck of materials, so that the mixer truck can pump materials immediately upon arrival, which can also improve construction efficiency.
Perhaps many people have doubts about lubricants whether they are corrosive. Here we can clearly tell you that the average molecular weight of polyacrylamide ranges from several to There are thousands to millions of functional groups along the bonded molecules, which can be mostly ionized in water, and are polymer electrolytes. According to the characteristics of its dissociable group, it is divided into anionic type (such as –COOH, –SO3H, –OSO3H, etc.), cationic type (such as –NH3OH, –NH2OH, –CONH3OH) and nonionic type. It is easily soluble in water and almost insoluble in water. Benzene, ether, esters, acetone and other general organic solvents, their aqueous solutions are almost transparent viscous liquids, non-dangerous goods, non-toxic and non-corrosive.
So, you don’t have to worry about the lubricant corroding the pump pipe. Similarly, the construction party doesn’t have to worry about the corrosion of its reinforced concrete, which will affect the quality of the project.
At the same time, according to relevant research data, after adding moisturizing agent to concrete, the retarding effect on concrete is obvious. , the better the retarding effect. Moreover, it also has a great influence on the strength of concrete at 28 days, and the strength gradually increases with the increase of the dosage.
Therefore, compared with mortar, lubricant can be said to have obvious advantages in all aspects. Nowadays, energy conservation and environmental protection are advocated, and lubricant is a good substitute for mortar. </p
微信扫一扫打赏
