Product Introduction
Instructions for use of Yulong Concrete Anti-segregation Agent is an emergency material developed by us for mixing stations. It has the characteristics of rapid dispersion of water, rapid evaporation of water and other products that deal with moisture and chemical substances. It is mainly aimed at emergency treatment of special situations where the concrete slump is large or the concrete segregation cannot meet the construction requirements due to material changes and production control failure to follow up in time.
Usage
1. Segregation caused by too much admixture
2. Segregation of concrete caused by too much water
3. Fine The aggregate suddenly becomes coarse and the powder content decreases sharply, resulting in concrete segregation or poor concrete workability.
4. The concrete itself does not segregate, but during concrete construction at the construction site, special parts with small concrete slump are required (for example: sloping roofs, sloped roads, stairs). Our products can also drastically reduce the concrete slump to meet construction requirements. . Not only can concrete be disposed of when it segregates on the construction site, but it can also be disposed of quickly if concrete is found to be segregated in the mixing station. It is quite convenient and fast, which greatly benefits the economy and time efficiency.
How to use (adding amount):
1. 1Kg can adjust 10 to 12 cubic meters of concrete. Depending on the slump of the concrete on site, the amount and slump can be finely adjusted. If the slump is small, you can add a little less; if the slump is large, you can add a little more appropriately.
2. Add our product into the concrete according to the dosage, stir the tank truck quickly for 1 to 2 minutes, and the concrete will return to normal state.
This product can be adjusted according to customer requirements, such as strength deviation, retardant component, water retention component, dispersion performance, etc.
<img src="/upfile/202304/2023041334528065.jpg"/
微信扫一扫打赏
