Toluene diisocyanate manufacturer Knowledge HF-3315 cycloaliphatic polyisocyanate oil-based two-component curing agent

HF-3315 cycloaliphatic polyisocyanate oil-based two-component curing agent

author: Post: 09/05/2023 88read Comments Off

Sales Name Cycloaliphatic polyisocyanate span>

Abbreviation HF-3315

Product Nature

NCO content (total)	about 15% by weight
NCO content (free)	<0.1 % by weight
solid content	80% by weight
Viscosity, 23℃	900 MPa.s
color value (APHA)	≤70
Flash point (closed cup)	50 ℃
density	1.08 g/cm3
Solvent	BAC

Recommended use

For the preparation of weather resistance, temperature resistance, quick drying, high hardness, good toughness, Polyurethane coating system with excellent chemical resistance

Curing agent for plastic, metal, automobile, bridge, etc.

Packaging

20kg iron drum, 200kg iron drum

Dry conditions

Dry at room temperature or bake at low temperature.

Precautions

The diluted solid content should not be lower than 40%.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1255