Toluene diisocyanate manufacturer Knowledge Water-based polyurethane shoe glue BY-945 non-yellowing, water-resistant, heat-resistant

Water-based polyurethane shoe glue BY-945 non-yellowing, water-resistant, heat-resistant

Water-based polyurethane shoe glue BY-945 non-yellowing, water-resistant, heat-resistant

Products Introduction
BY-945 is researched, developed and produced by Biyou New Materials (Guangzhou) Co., Ltd. A yellowing-resistant water-based polyurethane shoe glue can be widely used in the field of shoemaking.

Technology Metrics
Appearance: Blu-ray milky white liquid
Viscosity: 4500-7000mpa.s
Solid content: 45%±1%
PH value: 7.0~9.0
Density: 1.1g/cm³

Products Features
 Environmentally friendly, non-toxic, odorless and pollution-free; safe and stable, reducing risks; improving efficiency and reducing costs ;
 The construction is simple, and can be applied by brushing, rolling, spraying, scraping, etc.;
 The residual glue is easy to clean, and the construction tools can be cleaned with water, which is convenient and quick;
 No yellowing, good water resistance and heat resistance;
 High solid content, good initial tack and high bonding strength.

Suggestions Operating Conditions
 Before gluing, choose corresponding treatment agents for various materials;
 Apply glue after the treatment agent is fully dried, and the amount of glue applied should be uniform to avoid uneven thickness or lack of glue;
 The combination of this product and our curing agent can effectively improve its heat resistance, water resistance, grease resistance and other properties. Suggested dosage: 3% to 5%;
 The curing agent is more likely to react with moisture in the air, etc. After use, it should be tightly closed immediately to avoid deterioration;
 After gluing, the drying temperature should be set between 60°C and 70°C, and the drying time should be 4 to 5 minutes;
 When laminating, you should choose the best sticking time for lamination, align once, and try to avoid pulling apart and laminating again. After pasting, be sure to complete all pressurization actions within the stickiness maintenance time. Missing the best pasting time may lead to poor adhesion;
 When using a finishing agent to remove pollutants on the shoe surface, prevent the solvent from penetrating into the adhesive layer and destroying the crystallization, resulting in poor bonding;
 When the product is transformed by objective factors such as weather, if there is any difference in operation, process and quality, please contact our technical department in time to solve relevant problems in a timely and effective manner.

Save Conditions
Storage sealed and protected from light, the storage temperature range is controlled at 5-30°C, and the storage period should not exceed six months, do not mix with other adhesives of different properties.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1459

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search