Toluene diisocyanate manufacturer Knowledge BYK DISPERBYK 182 Wetting and Dispersing Additive

BYK DISPERBYK 182 Wetting and Dispersing Additive

BYK DISPERBYK 182 Wetting and Dispersing Additive

DISPERBYK-182


for aqueous and solventborne coating systems and printing inks Wetting and dispersing agent. Can be used with all pigments from non-polar to waterborne systems
Concentrated pulp.

Chemical composition


High molecular weight block copolymer containing pigment affinity groups Solution


typical materialized data


The data given on this data page are only typical values, is not a product specification.

Amine Value 13 mg KOH/g
Density (20 °C) 1.03 g/ml
Non-volatile content (20 min., 150 °C) 43 %
Solvent Propylene Glycol Methyl Ether Acetate/Dipropylene Glycol Methyl Ether/Butyl Acetate 7/4/4
Flashpoint 38 °C

Special reminder


The surface treatment of some organic pigments will affect the additive performance is adversely affected. In this case,try the same type of paint without treatment.

Application field


Paint Industry


Product Features and Benefits: DISPERBYK-182 Deflocculation of pigments by steric stabilization. Achieving a high glossdue to the small particle size of the deflocculated pigments ,Enhance color strength,Improve transparency or hiding power. Due to reduced viscosity, flow properties are improved, and pigment content.


Recommended use


DISPERBYK-182 Versatile,Suitable for solvent-borne and water-based systems. It can be used alone or with DISPERBYK-108 used together, used in production A more economical solvent-based pigment concentrate.

Recommended dosage


Auxiliary dosage(purchase form)Pigment based:

Titanium dioxide 2.5-5 %
Organic Pigments 7-13 %
carbon black 7-13 %

The amount added is for reference, The optimum dosage should be determined through a series of experiments.


Joining method and processing guidance


For best performance,Auxiliary must be added to the mill first,Then add the pigment. Pre-mix the resin and solvent components in the millbase,Then slowly add the additives under stirring. Pigments should only be added after the additive has been completely dispersed.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1655

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search