What should I do if the foam caulking agent cannot be applied?

PolyurethaneFoam Caulk is a commonly used InArchitectural decorationThe glue of the field. It is shaped like foam and has the function of filling gaps very well. Foam caulking agent may cause some problems. Faced with these problems, what should we do? For examplepolyurethane foam caulking font> cannot be typed, what should I do? The author is here today Tell you if Polyurethane foam caulkingWhat should I do if it cannot be typed?

If it appears, it can be shaken, but it cannot or cannot be completedType may be due to the following reasons: A, Foam caulkThe gun is not assembled in place and the valve is not opened. Just tightenFoam Caulk font>Gun, open the valveThat’s it. B. Foam caulkThe muzzle, adapter or barrel of the gun is clogged and should be cleaned immediately. Use cleaning agent to check whether it is smooth; or directly replace the glue gun with a new one. C、Glue gunThe valve appears “valve closed”, which may be caused by long-term reverse discharge. You can take out the jar, let it sit for five minutes, insert a nail into the valve, tap it lightly with a hammer, and install the glue gun as soon as you hear the ventilation sound. RecommendedUse once. D. Due to the low temperature(5℃Following), you can put the jar into warm water for about five minutes before it can be used normally.

The above isAuthortellEveryone Foam CaulkingRelated content about what to do if the typing cannot be done. If you need to purchaseFoam caulk, please select Shanghai Weigu Foam CaulkingProduced in the factoryFoam caulk. We ofpolyurethane foam caulking font>has good usability. If you want to knowmore font>PolyurethaneTips on foam caulking , pleaseFollow Shanghai Weigu Chemical Products Co., Ltd.