Toluene diisocyanate manufacturer Knowledge The reason why bubbles are generated after the electronic potting glue is cured

The reason why bubbles are generated after the electronic potting glue is cured

Main causes of bubbles

1 “>Air enters during stirring, The air is not completely removed during the injection of the product and throughout the curing process. Phenomenonvery smallDenseBubbles.

2, The reaction between moisture and curing agent produces gas. phenomenonIrregular-sized bubbles.

Solution:

1 , The first reason for bubbles The solution:

It is recommended to mix the main agent and curing agent in After together, vacuum it. Warm upWaitPoted products will help airPao.

2, Solution to the second cause of bubbles

There are several possibilities below for the reaction between moisture and curing agent

The main agent has been used many times ,during each stirring process There is moisture mixed in. It may also be because the lid of the package is not tightly closed. In order to prove what the reason is, Please mix the base agent and hardener in a dry cup according to the above instructionsAfter deaerationand put it in the oven60-80Cure. If bubbles still occur, It means that the main agent has deteriorated at this time,Please don’t do it again Use.

Potting products contain too much moisture, It is recommended to re-test the product after preheating it.

The surface of the mixture of base agent and curing agent reacts with moisture in the surrounding air. If so , Please cure in a dry environment ;font-size:19px”>, “>If the product allows it, can be cured in a heated oven.

The liquid main agent and curing agent mixture may be Exposed to other chemical substances( Such as solvents, release agents, varnishes, glues, etc.. Make sure these substances are removed before the next test.

Weigu polyurethane electronic potting glueisa two-component polyurethane adhesive. After curing through the potting process, the components can be reduced from being affected by external environmental conditions, ensuring that the components operate well in standard working environments, and improving the normal stability and service life of the components. The potting glue has the properties of insulation, moisture-proof, dust-proof, mildew-proof, shock-proof, leakage-proof, corona-proof, corrosion-proof, salt spray-proof, acid-proof and alkali-proof, vulcanization-proof, anti-aging, high and low temperature impact resistance, high humidity and high temperature resistance, Flame retardant, environmentally friendlyetc.Superior performance. Different potting adhesive application solutions have different performance requirements, resulting in different synthetic materials and formulas as well as synthetic process methods.

Shanghai Weigu Chemical Products Co., Ltd. was established in1996 /font>, was invested and established by a German company. It is a high-tech production enterprise integrating R&D, manufacturing and sales. Weigu isdomesticpolyurethane adhesive manufacturer, Weigu’s products cover many fields such as engineering construction, electronic components, industrial manufacturing, air purification, etc. Weigu Company mainly produces polyurethane electronic potting glue, polyurethane filter sealant, and polyurethane insulation casting glue, polyurethane foam caulking and other adhesives product. For twenty years, the company has been focusing on research and development in the field of polyurethane.

Shanghai Weigu has built two modern adhesive production bases in Shanghai and Shandong, covering a combined area of ​​more than 70,000 square meters, and has introduced fully automatic production lines from Europe. The company has a complete production management and quality assurance system and has passedISO9001-2008quality system certification. The company’s comprehensive technical indicators are at the forefront of the industry, and it has become a model of high quality and high reliability in the domestic adhesive industry.

Sub-potting glue, polyurethane filter sealant, polyurethane insulation casting glue, polyurethane foam caulking and other adhesive products. For twenty years, the company has been focusing on research and development in the field of polyurethane.

Shanghai Weigu has built two modern adhesive production bases in Shanghai and Shandong, covering a combined area of ​​more than 70,000 square meters, and has introduced fully automatic production lines from Europe. The company has a complete production management and quality assurance system and has passedISO9001-2008quality system certification. The company’s comprehensive technical indicators are at the forefront of the industry, and it has become a model of high quality and high reliability in the domestic adhesive industry.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/16866

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Home
E-mail
Products
Search