Which Anhui water-reducing agent manufacturer is the best for JH-202 air-entraining water-reducing agent?

1. Product Introduction
This product is an anionic surfactant, which can significantly reduce the surface tension of concrete. It has the characteristics of no chlorine, low alkali, water reduction, retarding, Features such as small slump loss. Adding this agent can improve the fluidity and plasticity of concrete, reduce bleeding and segregation, and increase the flexural strength by 10%-20%. The thermal diffusion and thermal conductivity of concrete mixed with this agent are reduced, and the volume stability of concrete and the weather resistance of various outdoor structures are improved. Air-entraining water-reducing agents are widely used in water conservancy, bridges, and road concrete, which is beneficial to extending the service life of roads. The most significant advantage of air-entrained concrete is that it greatly improves durability, frost resistance and salt freeze resistance. The appropriate air content for concrete with frost resistance and durability requirements is 3-5%, and the air content should not be too large.

2. Scope of application

It can be used for concrete, anti-seepage concrete, sulfate-resistant concrete, and water bleeding that require high resistance to freeze-thaw performance. Severe concrete, lean concrete, lightweight aggregate concrete, concrete prepared with artificial aggregates, ordinary concrete and concrete with requirements for finishes. Concrete structures with high requirements on durability (especially frost resistance). Such as dams, airport runways, high-grade concrete highway surfaces, cooling towers, pools, port engineering and offshore structures, etc. Concrete roads and bridges with ice and salt removed in northern areas. Concrete projects with high requirements on construction and workability.

3. Implementation standard: GB8076-1997

4. Dosage and usage:

1. The dosage is 1.0-1.5% of the cement weight. The user can determine the optimal dosage based on experiments. The dosage can be adjusted according to the trial mix.
2. Concrete mixed with this agent must be mechanically mixed, and the mixing time should be ≥3 minutes. The parking time from discharging to pouring of the concrete mixture mixed with this agent should not be too long. When inserting vibrator is used, the vibrating time should be ≥20s.

5. Packaging, transportation and storage: This product is packed in laminated woven bags, each bag is 40±0.25kg. It is strictly forbidden to use hooks for transportation and storage. Pay attention to moisture and sun protection, and the shelf life is two years.

</p