Advantages of silicone-based thermally conductive resin
Compared with non-silicone systems, there is a reduction in heat after various reliability tests blocking effect.
Different products can be selected according to film thickness
Through film adjustment to reduce thermal resistance - G-OOO series
When you need to use a thick film - choose CLG, SDP series
|
Product Name |
G-OOO Series |
CLG series |
SDP series |
|
|
Type |
Single component type |
two-component type |
||
|
Features |
Non-curing |
curing type (condensation, addition) |
Non-curing |
curing type (additional) |
|
use film |
filler |
|||
Curable thermal conductive silicone grease two-component curing type SDP series
|
|
SDP-1030-A/B |
SDP-2060-A/B |
SDP-3540-A/B |
SDP-5040-A/B |
SDP-6560-A/B2.87 / 2.87 |
3.08 / 3.07 |
3.25 / 3.26 |
3.20 / 3.20 |
|
hardness( Asker C) |
10 |
25 |
17 |
16 |
30 |
|||
|
Heat conduction Rate( W/m-K) |
1.1 / 1.1 |
2.3 / 2.3 |
3.5 / 3.5 |
5.1 / 5.1 |
6.5 / 6.5 |
|||
|
stretchlongRate(% ) |
480 |
70 |
40 |
30 |
20 |
|||
|
tensile Long degree( MPa) |
0.3 |
0.3 |
0.1 |
0.1 |
0.1 |
Features
・ By two-component mixing , Thermally conductive material that can be cured at room temperature.
・ Because it is low hardness, The load on components can be reduced. And it has no adhesion to the base material, so it can be reworked.
Application example
Vehicle ECU and various sensors
00000">0.10.1
Features
・ By two-component mixing , Thermally conductive material that can be cured at room temperature.
・ Because it is low hardness, The load on components can be reduced. And it has no adhesion to the base material, so it can be reworked.
Application example
Vehicle ECU and various sensors
微信扫一扫打赏
