decorative mortar

1. Product introduction:
Decorative mortar is based on the raw materials of mortar, adding polymer binder and pigment to form a surface material for wall or floor decoration. Its colors are natural and soft, bringing excellent decorative effect to the building facade. At the same time, it has properties such as heat resistance, mildew resistance, crack resistance, and flame retardancy. Its production and use are environmentally friendly and have low energy consumption. It can also be used to make various patterns on the surface manually or with the help of molds to form artistic mortar to form a variety of textures. , color and texture effects, which can be more perfectly integrated with the natural environment, architectural style and historical features. It is a promising building exterior and floor decoration material.
2. Product features:
1. Easy to construct, with good spreadability, fast and simple construction, and various methods;
2. Strong adhesion, good adhesion to the base material property;
3. Good anti-permeability effect, low water absorption, high hydrophobicity and stain resistance;
4. Good air permeability, which can ensure the dryness of the wall;
5 , with various colors, indoor and outdoor wall decorations are more perfect;
6. The color texture is natural and the vision is soft;
7. Water-resistant, weather-resistant, wear-resistant and breathable;
8. It has certain Flexibility to prevent coating cracking;
9. Safety and environmental protection; rich expression, strong three-dimensional effect, low cost and high cost performance.

3. Scope of application:
Decorative mortar is suitable for interior and exterior walls of industrial and civil buildings, gypsum boards, GRC boards, and interior and exterior wall color decoration on lightweight concrete surfaces, etc.

IV. Construction requirements:
It should be ensured that the mixing is even, and the mixing time should not be less than 5 minutes. It should be mixed and used up, and should be used up within the effective use time; construction is prohibited when it rains. ; The product should be constructed in an environment of 5~40℃; do not mix the dried glue with water before use.
1. The base surface must be smooth, solid, and without any oil stain;
2. Manual wiping construction can be used, or spray gun construction can be used to improve efficiency;
3. Add about 30% clean water Put it into a clean container, then slowly add the dry powder, and stir it with an electric mixer to form a slurry;
4. Apply in layers, and then make walls with various patterns or textures. The amount of material used is about 0.5~1Kg/m2. When completely dry, you can use acrylic paint to cover the surface.

5. Technical description:
1. When constructing the putty base surface of the exterior wall, special attention should be paid to not scraping the putty too smoothly;
2. When using a spray gun for construction, A gun with a large nozzle should be used to ensure smooth discharging. The horsepower of the air compressor should be large to ensure sufficient pressure to spray out the slurry;
3. Add water according to the amount for each ingredient. Do not add water at will. Do not add water halfway;
4. In order to increase the anti-fouling performance of the colored mortar, usually spray acrylic topcoat 1 to 2 times, the dosage is about 0.2 to 0.3Kg/m2. The performance of the topcoat requires UV resistance and high strength.
</p