Covestro Dispercoll C XP 2694/1 water-based neoprene high initial viscosity easy to spray good storage stability 2694 improved version

...

Product Introduction
A water-based colloidal dispersion of chloroprene polymer with a strong tendency to crystallize.
Dispercoll® C XP 2694/1 is notably characterized by good storage stability, high initial wet tack and good spray application properties.

Supply Form
Poly 2-chloroprene-(1,3) aqueous dispersion

Specifications

Features	Value	Measurement unit	Method
non Volatile components Content（2g / 3h/1 0 5℃)	>40	%	DIN EN ISO 3251
expressive viscosity(Brookfieldtest method,LV/Sp2/60rpm/25°C)	<30	mPa· s	DIN ISO 2555
PHvalue	8.0- 10.0	mPa· s	DIN ISO 976

Specifications

Features	Value	Measurement unit	Method
Density	about 1.09	g/ cm3	DIN 51757
Crystalline	Strong		DIN 53541
Minimum film forming temperature	about5	°C	DIN 53787

*This data is general information and is not part of the product manual.

Features/Applications
Dispercoll® C XP 2694/1 is suitable for the preparation of water-based adhesives, for example in the shoe, construction, furniture, mattress and automotive industries.

Save
- Store in original Covestro airtight container.
- Recommended storage temperature: 10-25℃
- Avoid freezing, high temperature and foreign substances.
General Information: This product is sensitive to freezing and must be protected from freezing. Freezing will cause irreparable damage to this product. The container must remain airtight, otherwise evaporation of moisture will result in the formation of a non-redispersible polymer film. Due to this process, the product will have a tendency to separate and it is recommended that each time a sample is taken, the product be first homogenized using a suitable mixer.

Storage Time
Covestro declares that, provided that the product has been stored in full compliance with the requirements set out in the "Storage" clause above and has been properly handled, the product has been shipped from the date of shipment stated on the transport document Compliance with the specifications or characteristic values ​​stated in the above clause "Specification or characteristic values" (as applicable) within 6 months.
If the product exceeds the above-mentioned 6-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, Covestro recommends that products older than 6 months from the shipping date be tested before use to confirm that they still comply with the values ​​set in the specifications or characteristic values. Covestro makes no promises and accepts no responsibility or liability for non-conformity to specifications or set values ​​in characteristic values ​​for products older than 6 months from the date of shipment.

Disposal
Please refer to the latest Product Safety Sheet.

Packaging
220L or 1000L container, oil tanker.

lign:center">about5

°C

DIN 53787

*This data is general information and is not part of the product manual.

Features/Applications
Dispercoll® C XP 2694/1 is suitable for the preparation of water-based adhesives, for example in the shoe, construction, furniture, mattress and automotive industries.

Save
- Store in original Covestro airtight container.
- Recommended storage temperature: 10-25℃
- Avoid freezing, high temperature and foreign substances.
General Information: This product is sensitive to freezing and must be protected from freezing. Freezing will cause irreparable damage to this product. The container must remain airtight, otherwise evaporation of moisture will result in the formation of a non-redispersible polymer film. Due to this process, the product will have a tendency to separate and it is recommended that each time a sample is taken, the product be first homogenized using a suitable mixer.

Storage Time
Covestro declares that, provided that the product has been stored in full compliance with the requirements set out in the "Storage" clause above and has been properly handled, the product has been shipped from the date of shipment stated on the transport document Compliance with the specifications or characteristic values ​​stated in the above clause "Specification or characteristic values" (as applicable) within 6 months.
If the product exceeds the above-mentioned 6-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, Covestro recommends that products older than 6 months from the shipping date be tested before use to confirm that they still comply with the values ​​set in the specifications or characteristic values. Covestro makes no promises and accepts no responsibility or liability for non-conformity to specifications or set values ​​in characteristic values ​​for products older than 6 months from the date of shipment.

Disposal
Please refer to the latest Product Safety Sheet.

Packaging
220L or 1000L container, oil tanker.