As a new type of environmentally friendly lubricating auxiliary material for concrete pumping equipment, lubricant has played a significant role in promoting concrete pumping work. The saving of river sand alone is worth learning from. ,use. There is no need to pour cement mortar that has been wetted into the pipe into the structure, which can be said to be safer.
The pipeline of the floor pump is long and has many bends, making flushing inconvenient and easily causing the pipeline to not be flushed cleanly. If the irresponsible staff just flushes hastily, there will be a lot of stones remaining in the bends of the pipes. It is generally difficult to wash away the remaining stones with water. You need to use a sponge ball to maximize the remaining stones in the pipes. Take away the stones. These characteristics put forward higher requirements for the lubricating effect of lubricants. Floor pumps are not like vehicle-mounted pumps. As long as the quality of the vehicle-mounted pump is not too poor, the effect is still OK. There are many low-quality pipe lubricants on the market with poor lubrication effect. If used on ground pumps, the pipelines will not be well lubricated and the pipes will easily become blocked when pumping concrete. Therefore, many construction units do not dare to use them on the ground. Use lubricating agent on the pump to moisten the pipes, or use the original cement mortar to moisten the pipes. The cost of moistening pipes with cement mortar is not only high, but also poses safety risks. Most construction units pour the cement mortar that has been moistened into the building structure directly. You can think about it, can the hardness of mortar be compared with the hardness of concrete? Why do many residential floor slabs have quality problems? Most of them are caused by cement mortar. If you want to completely use lubricant to replace cement mortar lubricant, you must use good quality lubricant produced by regular manufacturers on the market and use it according to the correct method given by the manufacturer. Yulong pipe moisturizing agent has been inspected by the construction front line for many years. It is concluded that the ground pump can completely use Yulong pipe moistening agent to complete the pipe moistening work and meet the requirements of energy saving, environmental protection, money saving, time saving and labor saving!
The core of using lubricant to moisten the pipes of ground pumps is that the pipes must be flushed and no large amounts of stones should remain in the bends of the pipes. To use a good moisturizer, the layman's understanding is to buy a better and more expensive moisturizer. Don't be greedy for small gains and buy some inferior moisturizers. The salt content in inferior moisturizers is very high. The side effects of corroding steel lead to many potential safety hazards! </p
微信扫一扫打赏
