Product Features and Benefits
——fiber lubrication
• The compatibility with organic lubricants is much better than that of general silicone oil and organic lubricants
• Easier to clean than ordinary silicone oil
——As a fabric coating additive
• Increased wear resistance
• Anti-adhesive
• Increase the fluidity of the resin coating
Application
• XIAMETER™ OFX-3667 Fluid is a block copolymer that can incorporate organic components to enhance surface properties.
• One of the applications is as a wetting agent in organic lubricant formulations for the comprehensive treatment of synthetic fibers: in addition the glycol group imparts antistatic properties. Since it dissolves in water, it is easier to clean.
• When used as an organic fabric coating additive, it can impart anti-sticking properties and softness. In addition, some coatings can also enhance wear resistance.
• Ethylene glycol as a capping end group contains reactive hydroxyl groups and is reactive with organic polymers such as polyurethane. Therefore, XIAMETER OFX-3667 Silicone Fluid can become part of the network through chemical reaction, enhancing the hydrolytic stability of the resin.
Typical Physical Properties
(The following values cannot be used for specification)
CTM1 |
parameter |
unit |
Value |
0176 |
Appearance@25°C |
|
cloudy liquid |
Flow point |
°C |
13 |
|
Active Ingredients |
% |
100 |
|
Viscosity@25°C |
cSt |
200-500 |
|
Hydroxyl component gram equivalent |
|
1200 |
|
HLB2 |
|
8.7 |
|
Proportion@25°C (77°F) |
|
1.04 |
|
Refraction coefficient |
|
1.438 |
|
0122 |
Flash point °C |
|
67.2 |
1. CTM: Corporate Test Method; copies of CTM are available upon request.
2. HLB=(Molecular Weight of Ethylene Oxide/Molecular Weight of Total Polymer) x 20.
Product Description
XIAMETER OFX-3667 Silicone Fluid can be used as supplied or diluted prior to addition. It is soluble in water and polar solvents, and dispersible in hydrocarbons and oils.
There are detailed information for different applications and addition of different media, general advice and starting formula information can be obtained from the technical service department.
Operation Precautions
This document does not contain product safety information required for safe use. Before use, please read the product, its safety data sheet and container labels for information on safe use, physical hazards and health hazards of the product. The Safety Data Sheet is available from the Dow web site at www.consumer.dow.com or from a Dow Sales Application Engineer or Distributor, or by calling your Dow Global Connection.
Save
The product should be stored between (-50°C) and 50°C in the original unopened container.
When stored at a temperature below 25°C, the product becomes a cloudy liquid: when the temperature is lower than 13°C, the product becomes waxy, and repeated melting of the product has no damage to the final performance.
Usage Restrictions
This product has not been tested or represented as suitable for medical or pharmaceutical use.
Health and Environmental Information
In order to help customers use products safely, Dow has set up strict product service organizations in various regions, and has a group of product safety and regulatory compliance experts to serve customers.
2. HLB=(Molecular Weight of Ethylene Oxide/Molecular Weight of Total Polymer) x 20.
Product Description
XIAMETER OFX-3667 Silicone Fluid can be used as supplied or diluted prior to addition. It is soluble in water and polar solvents, and dispersible in hydrocarbons and oils.
There are detailed information for different applications and addition of different media, general advice and starting formula information can be obtained from the technical service department.
Operation Precautions
This document does not contain product safety information required for safe use. Before use, please read the product, its safety data sheet and container labels for information on safe use, physical hazards and health hazards of the product. The Safety Data Sheet is available from the Dow web site at www.consumer.dow.com or from a Dow Sales Application Engineer or Distributor, or by calling your Dow Global Connection.
Save
The product should be stored between (-50°C) and 50°C in the original unopened container.
When stored at a temperature below 25°C, the product becomes a cloudy liquid: when the temperature is lower than 13°C, the product becomes waxy, and repeated melting of the product has no damage to the final performance.
Usage Restrictions
This product has not been tested or represented as suitable for medical or pharmaceutical use.
Health and Environmental Information
In order to help customers use products safely, Dow has set up strict product service organizations in various regions, and has a group of product safety and regulatory compliance experts to serve customers.