BASF Tinuvin 5060 light stabilizer

Products Introduction
TINUVIN 5050 is a compound light stabilizer used in the coating industry. Its excellent thermal stability and environmental durability make it suitable for protecting high-temperature baking systems and industrial coatings used under extremely harsh conditions. Based on its wide absorption range, TINUVIN 5050 can give effective protection to photosensitive substrates such as wood and plastics. Protect.

Absorption Spectrum
Toluene solvent, pool thickness 1CM

Physics Performance

Apply Scope
TINUVIN 5060 is a general-purpose light stabilizer. Suitable for varnishes, paints, waterborne and solventborne systems. This additive is especially recommended for the following fields, such as:

Wood coatings (especially alkyd varnishes , pigmented primers and coatings)
One-component or two-component PU coating
Penetrating wood varnish and wood anti-mildew primer
Non-polyurethane topcoat (such as: high-sterile alkyd, vinyl paint)
Industrial baking paint (such as: PVC plastic paint, polyester coil steel paint and general high temperature baking metal paint)
Unsaturated polyester/styrene system gel coat
Paint car wax, car polish and vinyl insecticide

Before adding TINUVIN 5060 into the water-based system, it should be miscible with water Mixed with soluble solvents, such as: butyldiethylene glycol.

Recommended Addition amount (Based on the solid content of the paint system)

The specific dosage should be subject to the actual test results

Security Guidance
TINUVIN 5060 refers to normal industrial operation. Please refer to the safety data sheet for specific data.

“>0.5%-1.5%

Paint car wax, car polish and vinyl insecticide

2－5%

The specific dosage should be subject to the actual test results

Security Guidance
TINUVIN 5060 refers to normal industrial operation. Please refer to the safety data sheet for specific data.