Toluene diisocyanate manufacturer Knowledge Instructions for use of anti-crack mortar construction

Instructions for use of anti-crack mortar construction

Instructions for use of anti-crack mortar construction

Anti-crack mortar is a flexible polymer mortar that is produced from cementitious materials, fibers, admixtures, cement and sand fillers according to a certain formula ratio and can meet a certain deformation without cracking (anti-crack mortar reference formula). The anti-crack mortar produced by our company is an ideal material for anti-crack plastering of polystyrene particle insulation layers and vitrified microbead insulation layers. Now let’s talk about the instructions for the construction and use of anti-crack mortar.

Instructions for construction of anti-crack mortar
1. Preparation of anti-crack mortar: Mix polymer anti-crack mortar dry powder and water according to the weight of 4:1, stir with an electric mixer for 3 minutes, and let stand for 5 minutes. Then stir evenly again and it can be used. The amount of one configuration should be used up in 2 hours;
2. Application: Apply the mixed polymer anti-cracking mortar evenly on the vitrified microbead insulation layer or polystyrene On the granular insulation layer, then lay mesh cloth (or steel mesh), and apply another layer of anti-crack mortar before the bottom layer of anti-crack mortar solidifies to cover the mesh cloth (steel mesh);
3. Anti-crack mortar Construction thickness: The thickness of the coating facing is greater than or equal to 3mm and less than or equal to 6mm, and the thickness of the ceramic tile facing is greater than or equal to 7mm and less than or equal to 10mm.
4. Precautions: Do not add water or other materials during the construction of anti-crack mortar. If there are agglomerations, do not proceed with construction. Pay attention to the construction temperature above 5℃. Pay attention to the storage of anti-crack mortar. It should be placed in a dry and ventilated place. place to avoid getting wet.

The instructions for the construction of anti-crack mortar are mainly for the vitrified microbead insulation layer or the polystyrene particle insulation layer, while the anti-crack protective layer of the polystyrene board (EPS/XPS) thin plaster insulation system is anti-crack. Practical instructions for plastering mortar construction can be found in Plastering Mortar.

</p

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/20558

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search