Oxytocin Oxytocin

Oxytocin structural formula

Structural formula

Business number 013X
Molecular formula C43H66N12O12S2
Molecular weight 1007.2
label

N-Benzyloxycarbonyl-S-Benzyl Cysteinyl Tyrosyl Isoleucyl Glutaminyl Asparaginyl (S-Benzyl) Cysteinyl Prolyl,

oxytocin,

A-Hypophamine,

Oxytocic hormone,

oxytocin

Numbering system

CAS number:50-56-6

MDL number:MFCD00076731

EINECS number:200-048-4

RTECS number:RS7534000

BRN number:3586108

PubChem number:24897975

Physical property data

1. Properties: White amorphous powder with slight odor 2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 192-194°C

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC , 5.2 kPa): Not determined

7. Refractive index: Not determined

8. Flash point (ºC): Not determined

9. Specific rotation (º): -26.2°, C=0.53, DIOXANE

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25 ºC ): Undetermined

12. Saturated vapor pressure (kPa, 60 ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Easily soluble in water, soluble in acetone, butanol and dilute acetic acid, insoluble in diethyl ether and petroleum ether

Toxicological data

None

Ecological data

None

Molecular structure data

None

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): -2.6

2. Number of hydrogen bond donors: 12

3. Number of hydrogen bond acceptors: 13

p>

4. Number of rotatable chemical bonds: 17

5. Number of tautomers: 1001

6. Topological molecular polar surface area (TPSA): 400

7. Number of heavy atoms: 69

8. Surface charge: 0

9. ���Hurility: 1870

10. Number of isotope atoms: 0

11. Number of determined atomic stereocenters: 9

12. Uncertain atomic stereocenter Number of stereocenters of chemical bonds: 0

13. Number of stereocenters of determined chemical bonds: 0

14. Number of stereocenters of uncertain chemical bonds: 0

15. Total Number of price key units: 1

Properties and stability

None

Storage method

Brown glass bottle with light-sealed packaging. Store in low temperature and dry place.

Synthesis method

1. Both oxytocin and vasopressin are nonapeptides. There is a basic amino acid residue in the vasopressin molecule, and their isoelectric points are different. The isoelectric point of oxytocin is 7.7 and that of vasopressin is 10.9, which means that vasopressin is highly alkaline. When the extract containing these two hormones is passed into an artificial zeolite column, vasopressin easily forms positively charged ions and most of them are adsorbed, while oxytocin flows out through the zeolite column. The effluent oxytocin solution can be treated with bentonite to obtain purer oxytocin.

Extraction of posterior pituitary gland dry powder ↓water separation ↓zeolite column to remove impurity protein ↓acetic acid

Bentonite adsorption ↓bentonite desorption ↓oxytocin acetate

The pituitary gland Add 100g of dry leaf powder and about 30g of quartz powder into 1.4L of distilled water, grind in a ball mill and extract for 45 minutes, centrifuge, and collect the supernatant. Add 1.4L, 1.3L, and 1.3L of water to the residue and extract 3 more times according to the above method. Combine the supernatants from 4 centrifugations. Add 1500g of treated artificial zeolite to 20L of 0.25% acetic acid solution, stir and put it into the exchange column. When the 0.25% acetic acid solution in the exchange column drops to 2 to 3cm below the surface of the zeolite, immediately add the extraction solution and adjust the flow rate appropriately. , collect the white turbid liquid that begins to flow out of the adsorption column. When the liquid level of the extraction liquid drops to the surface of the zeolite, add distilled water immediately, and stop collecting when the turbid liquid flows out. The extract solution flowing through the zeolite was adjusted to pH=3.5 with glacial acetic acid, then rapidly heated to 95°C in a water bath for 3 minutes, cooled immediately, and placed in a cold room at 0 to 5°C overnight. Filter the next day to get a clear filtrate. Then add the previously treated 10% bentonite slurry (usually 3ml per 100ml) to the filtrate while stirring, and stir continuously for 1 hour. The supernatant should be checked for complete adsorption (check with 20% sulfosalicylic acid solution, it should be No precipitation occurs), if the adsorption is incomplete, additional bentonite slurry should be added for adsorption. The 2 bentonite precipitations merged. The bentonite was then desorbed with 1% acetic acid solution. The total dosage is 5L and desorbed in 4 times. The dosages are 1.6L, 1.4L, 1.2L and 0.8L respectively. The 4 desorption liquids are combined. Determine the content of oxytocin and vasopressin in the desorption solution, and calculate the oxytocin potency. If the vasopressin does not exceed the limit, the oxytocin solution is obtained.

Purpose

1. It has a stimulating effect on smooth muscles and can cause the contraction of uterine smooth muscles, so it has an oxytocin effect. It can be used to induce labor, induce labor and uterine bleeding caused by weak uterine contractions after abortion. Intranasal instillation can promote milk excretion. It also has a slight hemostatic effect.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/39298

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search