Toluene diisocyanate manufacturer Knowledge Valproic acid Valproic Acid

Valproic acid Valproic Acid

Valproic acid structural formula

Structural formula

Business number 02GA
Molecular formula C8H16O2
Molecular weight 144.21
label

2-propylpentanoic acid,

dipropylacetic acid,

valproic acid,

A-propyl valeric acid,

di-n-propylacetic acid,

2,2-Di-n-propylacetic acid,

2-Propylpentanoic acid,

Dipropylacetic acid,

4-Heptanecarboxylic acid,

(CH3CH2CH2)2CHCOOH

Numbering system

CAS number:99-66-1

MDL number:MFCD00002672

EINECS number:202-777-3

RTECS number:YV7875000

BRN number:1750447

PubChem number:24898751

Physical property data

1. Properties: colorless liquid.

2. Density (g/mL, 20℃): 0.904

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): Undetermined

5. Boiling point (ºC, normal pressure): 221

6. Boiling point (ºC, kPa): Undetermined

7. Refractive index: 1.425

8. Flash point (ºC): 111

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Not determined

11. Vapor pressure (mmHg, 25ºC): Not determined

12. Saturated vapor pressure (kPa, 25ºC) : Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined Determined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Very slightly soluble in water.

Toxicological data

1. Acute toxicity: Rat oral LD5O: 670mg/kg

Mouse oral LD5O: 1098mg/kg

Guinea pig oral LD5O: 824mg/kg

p>

Ecological data

It is extremely harmful to water and toxic to fish. Do not let the product enter the water body.

Molecular structure data

1. Molar refractive index: 40.63

2. Molar volume (cm3/mol): 155.5

3. Isotonic specific volume (90.2K): 369.6

4. Surface tension (dyne/cm): 31.8

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 16.10

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 5

5. Number of tautomers: none

6. Topological molecule polar surface area 37.3

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 93.4

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with strong oxidants and strong alkali.

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The packaging is sealed. They should be stored separately from oxidants and alkalis, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. Suitable materials should be available in the storage area to contain spills.

Synthesis method

1. Obtained from dipropylmalonic acid through elimination and decarboxylation. Put dipropylmalonic acid into the reaction pot and heat it to 180°C. The reactants gradually melt and release a large amount of carbon dioxide gas. After the elimination reaction is completed, distill under reduced pressure and collect the 112-114°C (0.93-1.06kPa) fraction, which is 2-propylpentanoic acid, with a yield of 86%.

2. Preparation method:

Dipropylmalonic acid (3): In a reaction bottle equipped with a stirrer and reflux condenser, add dipropylmalonic acid Diethyl ester (2) 122g (0.5mol), ethanol 220mL, 4% potassium hydroxide 400g, stir and reflux for 4 hours. The ethanol was distilled off under reduced pressure. Cool to room temperature, slowly add concentrated hydrochloric acid, adjust to pH 1, and precipitate solid. Cool, filter, wash with water and dry to obtain 75.0g of yellow crystals of dipropylmalonic acid (3), yield 80%, mp. 155~158°C. 2-Propylvaleric acid (1): Add 75.0g (0.4mol) of dipropylmalonic acid (3) into the reaction bottle, slowly heat the oil bath to 180°C, the reactant gradually melts, and a large amount of carbon dioxide gas is released. , until no carbon dioxide gas escapes. Distill under reduced pressure and collect the fractions at 120~123℃/1.86kPa to obtain light yellow 2-n-propyl acid (1) 49.5, yield 86%, nD141.4252. Note: ① It can also be prepared by reacting ethyl acetoacetate with n-bromopropane and then performing alkaline hydrolysis. [1]

Purpose

Used as pharmaceutical intermediates and organic synthesis.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/41499

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search