Toluene diisocyanate manufacturer Knowledge Cyclopentanone Cyclopentanone

Cyclopentanone Cyclopentanone

Cyclopentanone structural formula

Structural formula

Business number 03CZ
Molecular formula C5H8O
Molecular weight 84.12
label

Adipic keyone,

Ketocyclopentane,

Ketopentamethylene,

spices,

Alicyclic compounds

Numbering system

CAS number:120-92-3

MDL number:MFCD00001409

EINECS number:204-435-9

RTECS number:GY4725000

BRN number:605573

PubChem number:24846157

Physical property data

1. Properties: water-white liquid with an ether-like odor. [1]

2. Melting point (℃): -51.3[2]

3. Boiling point (℃): 130.6[3]

4. Relative density (water = 1): 0.95[4]

5. Relative vapor Density (air=1): 2.3[5]

6. Saturated vapor pressure (kPa): 1.52 (25℃)[6]

7. Critical pressure (MPa): 5.2[7]

8. Octanol/water partition coefficient: 0.63[8]

9. Flash point (℃): 26; 30.5 (CC) [9]

10. Explosion limit (%): 10.4[10]

11. Lower explosion limit (%): 1.7[11]

12. Solubility: insoluble in water , soluble in most organic solvents such as ethanol, ether, acetone and so on. [12]

13. Eccentricity factor: 0.388

14. Solubility parameter (J·cm-3)0.5: 21.103

15. van der Waals area (cm2·mol-1): 7.000×109

16. van der Waals volume (cm3·mol-1): 52.620

17. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -2875.2

18. Liquid phase standard claimed heat (enthalpy) (kJ·mol-1): -235.7

19. Liquid phase standard hot melt (J·mol-1·K-1) : 164.2

20. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -2917.9

21. Gas phase standard claimed heat (enthalpy) )( kJ·mol-1): -192.1

22. Gas phase standard entropy (J·mol-1·K-1 ): 313.68

23. Gas phase standard free energy of formation (kJ·mol-1): -90.6

24. Gas phase standard heat Melting (J·mol-1·K-1): 95.33

Toxicological data

1. Acute toxicity[13]

LD50: 1820mg/kg (mouse oral); 1950mg/kg (mouse intravenous)

LC50: 19500mg/m3 (rat inhalation)

2. Irritation [14]

Rabbit transdermal: 500mg, mild stimulation.

Rabbit eye: 100mg, severe irritation.

Ecological data

1. Ecotoxicity[15] IC50: 63~1900mg/L (72h) (algae)

2. Biodegradability No data yet

3. Non-biodegradability[16] In the air, when the hydroxyl radical concentration is 5.00×1At 05 pieces/cm3, the degradation half-life is 5.5d (theoretical).

Molecular structure data

1. Molar refractive index: 23.18

2. Molar volume (cm3/mol): 85.2

3. Isotonic specific volume (90.2K ): 205.7

4. Surface tension (dyne/cm): 34.0

5. Dielectric constant: None available

6. Polarizability: 9.19

7. Single isotope mass: 84.057515 Da

8. Nominal mass: 84 Da

9. Average mass: 84.1164 Da

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 0.4

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: 2

6. Topological molecule polar surface area 17.1

7. Number of heavy atoms: 6

8. Surface charge: 0

9. Complexity: 58.3

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[17] Stable

2. Incompatible substances [18] Strong oxidizing agent, strong alkali, strong reducing agent

3. Polymerization hazard[19] No aggregation

Storage method

Storage Precautions[20] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 37°C. Keep container tightly sealed. They should be stored separately from oxidants, reducing agents, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Obtained by heating adipic acid in the presence of barium hydroxide. Mix adipic acid and barium hydroxide evenly, heat to 285-295°C, and distill out the generated cyclopentanone at this temperature. The distillate is salted out with calcium chloride to separate cyclopentanone. Add a certain amount of alkali solution to remove adipic acid, then wash with water. After drying with anhydrous calcium chloride, fractionate and collect the 128-131°C fraction to obtain the finished product. Yield 75-80%.

2. Preparation method:

In a reaction bottle equipped with a distillation device and a thermometer (extending close to the bottom of the reaction bottle), add 200g (1.34mol) of adipic acid (2) and 10g of finely ground barium hydroxide powder, and mix thoroughly Evenly. Slowly heat over low heat to 285~290℃, and liquid will slowly come out. Maintain this temperature until only a small amount of residue remains in the reaction flask. The distillate was saturated with calcium chloride, the organic layer was separated, washed with dilute alkali and saturated brine in sequence, dried over anhydrous magnesium sulfate, fractionated, and the fractions at 128-132°C were collected to obtain 90g of cyclopentanone (1), collected The rate is 78%. [22]

Purpose

1. This product is an organic chemical raw material. It is a raw material for the pharmaceutical and spice industries. It can be used to prepare new spices, methyl hydrojasmonate, and is also used in rubber synthesis; biochemical research and as a pesticide. Used as solvents, medicines, spices, pesticides, and synthetic rubber intermediates.

2. Used as an intermediate for pharmaceuticals, biological products, pesticides and synthetic rubber. [21]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/43461

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search