Toluene diisocyanate manufacturer Knowledge Dibutylamine Dibutylamine

Dibutylamine Dibutylamine

Dibutylamine structural formula

Structural formula

Business number 034N
Molecular formula C8H19N
Molecular weight 129
label

di-n-butylamine,

di-n-butylamine,

N-Dibutylamine,

Di-n-butylamine,

n-Butyl-1-butanamine

Numbering system

CAS number:111-92-2

MDL number:MFCD00009429

EINECS number:203-921-8

RTECS number:HR7780000

BRN number:506001

PubChem ID:None

Physical property data

1. Properties: colorless liquid with ammonia odor. [1]

2. Melting point (℃): -62~-59[2]

3. Boiling point ( ℃): 159~160[3]

4. Relative density (water=1): 0.76[4]

5. Relative vapor density (air=1): 4.46[5]

6. Saturated vapor pressure (kPa): 0.27 (20℃)[6]

7. Critical pressure (MPa): 3.11[7]

8. Octanol/water partition coefficient: 2.83 [8]

9. Flash point (℃): 51.6 (OC) [9]

10. Ignition temperature (℃ ): 312.22[10]

11. Explosion upper limit (%): 10.0[11]

12. Explosion lower limit (%): 1.1[12]

13. Solubility: Slightly soluble in water, soluble in ethanol, ether, acetone, and benzene. [13]

14. Refractive index (20ºC): 1.4177

15. Viscosity (mPa·s, 20ºC): 0.95

16. Heat of evaporation (KJ/mol, 25ºC): 50.58

17. Heat of formation (KJ/mol): -158.14

Toxicological data

1. Acute toxicity[14] LD50: 220mg/kg (rat oral); 1010mg/kg (rabbit dermal)

2. Irritation[15] Rabbit transdermal: 500mg, moderate irritation (open stimulation test)

Ecological data

1. Ecotoxicity[16]

LC50: 5.5mg/L (96h) (rainbow trout, soft water); 37mg/L (96h) (rainbow trout, hard water)

EC50: 87mg/L (24h), 66mg/L (48h) (Daphnia); 16mg/L (72h) (Scenedesmus); 19mg/L (96h) (green algae, static)

2. Biodegradability No data available

3. Non-biodegradability [17] In the air, when the concentration of hydroxyl radicals is 5.00×105/cm3, the degradation half-life is 4h (theoretical ).

4. Bioconcentration[18] BCF: 30 (theoretical)

Molecular structure data

1. Molar refractive index: 42.70

2. Molar volume (cm3/mol): 169.4

3. Isotonic specific volume (90.2K ): 378.3

4. Surface tension (dyne/cm): 24.8

5. Polarizability (10-24cm3): 16.93

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): None

2. Hydrogen�Number of donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 6

5. Tautomerism Number of bodies: None

6. Topological molecule polar surface area 12

7. Number of heavy atoms: 9

8. Surface charge: 0

9. Complexity: 37.8

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. No Determine the number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Uncertain number of chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Chemical properties: It has the chemical properties of secondary amines. It is relatively stable against heat and does not change when heated (200~270℃) under reduced pressure (13.33~33.33KPa) for a long time. However, when heated together with aluminum chloride, etc., it will decompose and generate butylamine, ammonia, etc.

2. Stability[19] Stable

3. Incompatible substances[20] Acids, acid chlorides, acid anhydrides, strong oxidants, carbon dioxide

4. Polymerization hazards [21] No polymerization

Storage method

Storage Precautions[22] Stored in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 30℃. Keep container tightly sealed. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

There are two production methods for di-n-butylamine.
1. n-butanol method
It is obtained by the interaction of n-butanol and ammonia. The reaction equation is as follows: n-C4H9OH+NH3+H2→n-C4H9NH2+(n-C4H9)2 NH+(n-C4H9)3N
The process is: pass n-butanol, ammonia and hydrogen through the flow meter Control, and flow into the stainless steel reaction tower according to the proportion. The tower is filled with copper-nickel acidic clay catalyst, and the reaction temperature is around 200°C. After the reaction is completed, the reaction gas is condensed, and the crude product obtained contains 2% to 4.82% of monobutylamine, 17% to 26% of dibutylamine, and 31% to 61% of tributylamine. Monobutylamine, Dibutylamine and tributylamine.

2. Lime nitrogen (calcium cyanamide) method
The reaction equation is as follows: CaCN[NaOH]→Na2NCN[C4H9Br]→(C4H9)2NCN[H2 sub>O]→[H2SO4](C4H9)2NH
The process is as follows: suspend lime nitrogen in ice water, slowly add cooled sodium hydroxide solution, keep the temperature below 25°C, and stir vigorously for 1 hour to obtain sodium cyanamide solution. Add bromobutane ethanol solution to this solution, stir and reflux for 2.5 hours, and then perform distillation. The residue is cooled and filtered with suction. The filter cake is washed with ethanol. The filtrate and washing liquid are combined, extracted with benzene, and the extract is washed with anhydrous water. The calcium sulfate is dried, and after benzene is evaporated, the residue is distilled under reduced pressure, and the 147-151°C/4.66kPa fraction is collected to obtain dibutyl cyanamide. Add water, concentrated sulfuric acid, and dibutyl cyanamide to the reactor in turn, reflux slowly for 6 hours, cool, and pour cooled sodium hydroxide solution along the wall of the reactor (flow to the bottom of the reactor without mixing with the reaction materials) to free the amine. Separate; then heat to evaporate the amine and water together. Add granular potassium hydroxide to the distillate, cool it with ice, separate the amine layer, dry and distill, and collect the 157-160°C fraction to obtain the finished product.

Purpose

1. Used as corrosion inhibitors, emulsifiers, insecticides, polymerization inhibitors, medicines, pesticides, dyes, flotation agents, anti-corrosion agents, plasticizers, rubber vulcanization accelerators, etc.

2. Used as corrosion inhibitor, emulsifier, rubber accelerator, insecticide, polymerization inhibitor, etc. [23]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/43956

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search