Toluene diisocyanate manufacturer Knowledge 10-Undecenoic acid 10-Undecenoic acid

10-Undecenoic acid 10-Undecenoic acid

10-Undecenoic acid structural formula

Structural formula

Business number 035L
Molecular formula C11H20O2
Molecular weight 184.28
label

Undecylenic acid,

Undec-10-enoic acid,

fragrance,

acidic solvent

Numbering system

CAS number:112-38-9

MDL number:MFCD00004442

EINECS number:203-965-8

RTECS number:YQ2975000

BRN number:1762631

PubChem number:24856513

Physical property data

1. Properties: Colorless or light yellow liquid with special smell

2. Density (g/mL, 25℃): 0.9072

3. Relative density ( 20℃, 4℃): 0.907224

4. Melting point (ºC): 24.5

5. Boiling point (ºC, normal pressure): 275

6. Refractive index at room temperature (n20): 1.447225

7. Refractive index (n sub>25D): 1.4464

8. Flash point (ºC): 148

9. Refractive index at room temperature ( n25): 1.445730

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, 70ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Oil and water (octanol/water) distribution Log value of coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Almost insoluble in water, soluble in ethanol, ether, chloroform and other organic solvents

Toxicological data

Acute toxicity:

Oral LD50 8150mg/kg(mus)

2500mg/kg(rat)

Skin irritation severe 500mg/24H(rbt)

Main irritating effects:

On the skin: Irritating the skin and mucous membranes.

On the eyes: irritating effects.

Sensitization: No known sensitizing effects.

Ecological data

General notes

Generally not hazardous to water

Do not discharge material into the surrounding environment without government permission.

Molecular structure data

1. Molar refractive index: 54.63

2. Molar volume (cm3/mol): 198.3

3. Isotonic specific volume (90.2K ): 478.7

4. Surface tension (dyne/cm): 33.9

5. Polarizability (10-24cm3): 21.65

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 9

5. Number of tautomers: none

6. Topological molecule polar surface area 37.3

7. Number of heavy atoms: 13

8. Surface charge: 0

9. Complexity: 141

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with strong oxides.

2.This product has low toxicity and slight irritation. The oral LD50 for rats is 2500mg/kg. Operators should wear protective equipment.

3. Exist in smoke.

4. The original document does not specify the position of the olefinic bond, and the content here refers to 10-undecenoic acid.
 

Storage method

1. Packed in lead barrels or plastic barrels.

2. Packed in aluminum barrels or plastic barrels, each barrel weighs 20kg, 50kg or 100kg.

Synthesis method

It is produced by direct pyrolysis or esterification pyrolysis of castor oil.

1. Castor oil direct cracking method: Put the castor oil into a stainless steel reaction pot, heat it under direct fire, carbonize under reduced pressure, collect the distillate, and then fractionate to obtain undecylenic acid and heptanoic acid.


2. Ricinoleate methyl ester method castor oil (Ricinoleic acid glyceryl ester) is transesterified with methanol, and then cracked at high temperature to obtain methyl undecylenate, which is then saponified; after acidification and refining, the finished product is obtained, and heptanal, glycerin and other products are by-produced.
Raw material consumption quota: castor oil (medicinal) 4700kg/t; methanol (industrial product) 1410kg/t; sulfuric acid (industrial product) 658kg/t; caustic soda (95%) 40kg/t; sodium bisulfite ( 95%) 940kg/t.

Purpose

1. It is an important raw material for the synthesis of fragrances, such as γ-laurolactone (also known as peach aldehyde), polycyclopentadecanolactone, muscone, nonanal, etc. It can also be used as antifungal drugs and drugs to treat skin mycosis, and can synthesize surfactants with antibacterial properties such as sodium undecyl monoethanolamide succinate sulfonate. It can also be used to prepare plasticizers, etc. The maximum allowable usage amount (mass fraction) in cosmetics is 0.2%, and it is stable in the pH range of 5.0 to 6.5. The dosage (mass fraction) used as a pharmaceutical antifungal agent is 2% to 15%.

2.is an important raw material for synthetic fragrances, such as γ-undecanolide, polycyclopentadecanolactone, and musk Ketones, nonanal and nonanol can also be used as raw materials for antibiotics and drugs for treating skin mycosis.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/44460

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search