Toluene diisocyanate manufacturer Knowledge Preparation of (1S, 2R)-2-phenyl-cyclopropylamine hydrochloride_Kain Industrial Additive

Preparation of (1S, 2R)-2-phenyl-cyclopropylamine hydrochloride_Kain Industrial Additive

Preparation of (1S, 2R)-2-phenyl-cyclopropylamine hydrochloride_Kain Industrial Additive

Background and overview[1]

(1S, 2R)-2-phenyl-cyclopropylamine hydrochloride can be used as a pharmaceutical synthesis intermediate. If (1S, 2R)-2-phenyl-cyclopropylamine hydrochloride is inhaled, move the patient to fresh air; if skin contact occurs, remove contaminated clothing and wash skin thoroughly with soap and water, if necessary If you feel discomfort, seek medical attention; if eye contact occurs, separate eyelids, rinse with running water or saline, and seek medical attention immediately; if ingested, rinse mouth immediately, do not induce vomiting, and seek medical attention immediately.

Preparation[1]

The preparation of (1S, 2R)-2-phenyl-cyclopropylamine hydrochloride is divided into the following steps:

Step 1: General procedure for the synthesis of trans and cis 2-phenylcyclopropylcarboxylic acids (4a-c and 5a-c). Example: trans 2-(4-nitrophenyl)cyclopropylcarboxylic acid (4c). A solution of 2c (9.95 mmol, 2.34 g) and 2NKOH (19.9 mmol, 1.12 g) in ethanol (30 mL) was stirred at room temperature overnight. The reaction was quenched by adding 2 N HCl until pH = 2, then the precipitate was filtered, washed with water (3 × 30 mL) and dried to give pure 4c as a light yellow solid. Compound 4a. The yield is 93%. Melting point: 93-95℃

Step 2: General/Typical Procedure: General procedure for the synthesis of trans and cis tert-butyl 2-(4-nitrophenyl)cyclopropylcarbamate (6a-c and 7a-c). Example: trans-tert-butyl 2-(4-nitrophenyl)cyclopropylcarbamate (6c). 4c (5.3 mmol, 1.1 g) was dissolved in anhydrous benzene (20 mL), triethylamine (6.4 mmol, 0.9 mL), diphenylphosphoryl azide (5.8 mmol; 1.2 mL) and tert-butanol (53 mmol, The solution in 5 mL) was stirred under nitrogen atmosphere and kept at 80 °C for 16 h. Then, di-tert-butyl dicarbonate (8 mmol, 1.7 g) was added, and the reaction was continued at 80°C for 2 hours. The solvent was removed in vacuo, and the residue was purified by silica gel chromatography, eluting with ethyl acetate/n-hexane 1/3, to obtain pure 6c as a pale yellow solid. Compound 6a. The yield is 58%. Melting point: 78-80℃

Step 3: Synthesis of (±)-tPCPA, (±)-cPCPA, (±)-Br-tPCPA and (±)-Br-tPCPA from trans-2-(4-aroyl (or arylacetyl or benzyloxycarbonyl) General procedure for ±)-Br-cPCPA hydrochloride) aminophenyl) cyclopropylamine hydrochloride (13a-h), trans 4-(N-benzyloxycarbonylaminoacyl) aminophenyl) cyclopropylamine hydrochloride salts (14a-m, 18 and 20), and cis-tert-butyl 2-[4-(N-)benzyloxycarbonylphenylalanyl)aminophenyl]cyclopropylamine hydrochloride (15). Example: trans 2-[4-(N-benzyloxycarbonyltryptophanyl)aminophenyl]cyclopropylamine hydrochloride (14l). A solution of 6NHCl (2 mL) was added to a solution of 11 l (0.26 mmol, 0.1 g) in tetrahydrofuran (2 mL) and the mixture was stirred at room temperature for 12 hours. The precipitated solid was filtered, washed with diethyl ether (3 x 10 mL) and dried to give pure 14l as a colorless solid. (±)-tPCPA; (±)-cPCPA.

Step 4: General synthesis of (±)-tPCPA, (±)-cPCPA, (±)-Br-tPCPA and (±)-Br-cPCPA hydrochloride from trans-2-(4-aroyl) Procedure (or arylacetyl or benzyloxycarbonyl)aminophenyl)cyclopropylamine hydrochloride (13a-h), trans 4-(N-benzyloxycarbonylaminoacyl)aminophenyl)cyclopropylamine hydrochloride salts (14a-m, 18 and 20), and cis-tert-butyl 2-[4-(N-benzyloxycarbonylphenylalanyl)aminophenyl]cyclopropylamine hydrochloride (15). Example: trans 2-[4-(N-benzyloxycarbonyltryptophanyl)aminophenyl]cyclopropylamine hydrochloride (14l). A solution of 6NHCl (2 mL) was added to a solution of 11 l (0.26 mmol, 0.1 g) in tetrahydrofuran (2 mL) and the mixture was stirred at room temperature for 12 hours. The precipitated solid was filtered, washed with diethyl ether (3 × 10 mL) and dried to obtain pure (1S, 2R)-2-phenyl-cyclopropylamine hydrochloride as a colorless solid. (±)-tPCPA; (±)-cPCPA. The yield is 95%. Melting point: 162-164℃

Main reference materials

[1] Biochemical, Structural, and Biological Evaluation of Tranylcypromine Derivatives as Inhibitors of Histone Demethylases LSD1 and LSD2

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/5748

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search