Application of 1,4-dibromo-2-fluorobenzene_Kain Industrial Additive

Background and overview^[1]

1,4-Dibromo-2-fluorobenzene can be used as an intermediate for pharmaceutical and chemical synthesis. If 1,4-dibromo-2-fluorobenzene is inhaled, please move the patient to fresh air; if there is skin contact, take off contaminated clothing, wash the skin thoroughly with soap and water, and seek medical treatment if you feel uncomfortable; If eye contact occurs, separate eyelids, rinse with running water or saline, and seek medical attention immediately; if ingested, rinse mouth immediately, do not induce vomiting, and seek medical attention immediately.

Apply^[1]

1,4-Dibromo-2-fluorobenzene can be used as raw material to prepare a fluorine-substituted organic small molecule hole transport material. The synthesis route is as follows:

Step 1: 1,1′-[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b’]dithiophene under nitrogen conditions -2,6-diyl]bis[1,1,1-trimethyltin] (0.5g, 0.65mmol), 1,4-dibromo-2-fluorobenzene (1.0g, 3.9mmol), tetra( Triphenylphosphine)palladium (Pd(PPh ₃ ) ₄ ) (22.5 mg, 19.5 μmol) and toluene (100 mL) were added to a 250 mL round-bottomed flask. React for 6 hours at 80°C. After the reaction is completed, cool to room temperature, extract with dichloromethane (CH ₂ Cl ₂ ), wash the organic phase with brine, and anhydrous MgSO ₄ Dry, evaporate and concentrate to remove the solvent. The crude product was chromatographed with CH ₂ Cl ₂ and n-hexane column chromatography (hexane: CH ₂ Cl ₂ =4 :1 (v/v)), obtaining a yellow-green intermediate product (270 mg, yield 53%).

Step 2: Nitrogen protection, the above intermediate (0.79g, 1mmol), 4,4′-dimethoxydiphenylamine (0.58g, 2.5mmol), tris(dibenzylideneacetone)dipalladium (Pd ₂ (dba) ₃ ) (37mg, 0.12mmol), tri-tert-butylphosphine (P(t-Bu) ₃ ) (26mg , 0.12mmol), sodium tert-butoxide (NaOt-Bu) (25mg, 0.25mmol) and toluene (20mL) were added to a 100mL round-bottom flask and reacted at 110°C for 2d (48 hours). After the reaction was completed, the mixture was cooled to room temperature. The mixture was extracted with dichloromethane (CH ₂ Cl ₂ ) and washed with brine. The organic layer was dried with MgSO4 and concentrated by rotary evaporation to remove the solvent. The crude product was chromatographed with CH ₂ Cl ₂ and n-hexane column chromatography (hexane: CH ₂ Cl ₂ =2 :1(v/v)). Finally, a yellow powder (886 mg, yield 82%) was obtained.

Main reference materials

[1] CN108467402 Fluorine-substituted organic small molecule hole transport materials and their applications