Toluene diisocyanate manufacturer Knowledge Covestro Pergut S 20 Additive S20 for solventborne neoprene contact adhesives

Covestro Pergut S 20 Additive S20 for solventborne neoprene contact adhesives

                           

Features Binders and additives for chlorinated rubber anti-corrosion coatings, cement floor coatings and road marking coatings

Supply Form fine powder

Specifications

Features

Value

Measurement unit

Method

Viscosity,18.5%toluene Solution

20±4

mPa·s

DIN 53015

Iodine color value,18.5%Toluene solution

≤7

DIN EN 1557

Tetrachloromethane content

≤0.005

%(by weight)

about1.5

g/ml

Ash

about0.3

%(by weight)

DIN 53568

Moisture

<0.3

%(by weight)

DIN 51777

Chlorine content

≥64.5

%(by weight)

DIN EN ISO 1158

*This data is general information and is not part of the product manual.

Features /app
Pergut® S 20 can be used in the preparation of quick-drying anti-corrosion coatings, with good weather resistance, water resistance and chemical resistance. Also used in abrasion resistant cement floor coatings and road marking coatings. It can also be used for the preparation of treatment agents.

dissolve Sexuality/Dilution
Generally, Pergut® S 20 has good compatibility with various solvents, plasticizers and binders. However, it is still necessary to test its solubility/compatibility in actual use.

Save
– Store in original airtight container.
– Recommended storage temperature: 10-25°C.
– Avoid direct sunlight, moisture, heat and foreign substances.

Save Time
When the product is stored in full compliance with the requirements of the above “storage” clause and handled properly, the product meets the requirements within 9 months from the date of shipment stated on the transport document Specifications or characteristic values ​​described in the “Specification or characteristic values” clause above, as applicable.
If the product exceeds the above-mentioned 9-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, it is recommended that products older than 9 months from the date of shipment be tested before use to confirm that they still meet the specifications or characteristic values. The manufacturer makes no promises, nor assumes no responsibility and liability for its non-compliance with the set values ​​in the specifications or characteristic values.

Security
Product data sheets are only valid in conjunction with their corresponding, most current safety data sheets. Any updates to safety-related information – as required by regulation – will only be reflected in the Safety Data Sheet, copies of which will be revised and distributed accordingly. For relevant information, including up-to-date classification and labelling, applications, handling methods and further safety-related data, please refer to the currently valid Safety Data Sheet.

�Keep in an airtight container.
– Recommended storage temperature: 10-25°C.
– Avoid direct sunlight, moisture, heat and foreign substances.

Save Time
When the product is stored in full compliance with the requirements of the above “storage” clause and handled properly, the product meets the requirements within 9 months from the date of shipment stated on the transport document Specifications or characteristic values ​​described in the “Specification or characteristic values” clause above, as applicable.
If the product exceeds the above-mentioned 9-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, it is recommended that products older than 9 months from the date of shipment be tested before use to confirm that they still meet the specifications or characteristic values. The manufacturer makes no promises, nor assumes no responsibility and liability for its non-compliance with the set values ​​in the specifications or characteristic values.

Security
Product data sheets are only valid in conjunction with their corresponding, most current safety data sheets. Any updates to safety-related information – as required by regulation – will only be reflected in the Safety Data Sheet, copies of which will be revised and distributed accordingly. For relevant information, including up-to-date classification and labelling, applications, handling methods and further safety-related data, please refer to the currently valid Safety Data Sheet.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/993

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search