Ancamide 221-X70 : low-cost solvent-based polyamide resin, 70% solids. It can be applied to primer and solvent-based topcoat.
The ratio is: 221-70X: 128 (liquid epoxy resin) = 1.7: 1
221-70X: 1001 (solid epoxy resin) = 66: 100
Ancamine 2773 : low-cost alicyclic amine curing agent, can be used in medium coating, low proportion, low oil surface, good yellowing resistance, compared with mainstream 113 curing agent, light color, high PVC content, 100 % solid content, can be applied to epoxy floor primer and topcoat not sensitive to color requirements
Ancamine 2883 : Low-cost surface coating alicyclic amine curing agent, high brightness, low ratio, can be applied to self-leveling surface coatings except light gray and white, with good anti-corrosion performance, scratch resistance and hardness.
Ancamine 2280 : Low-cost and highly anti-corrosion alicyclic amine curing agent, which can be applied to floors with high anti-corrosion requirements, such as:
Electroplating plants, sewage treatment plants, chemical plants, etc., have high anti-corrosion performance, and 128 resin can withstand 70% concentrated sulfuric acid, 50% sodium hydroxide and 10% nitric acid. Anti-corrosion properties.
Ancamine 2422 : The best anti-corrosion curing agent, which can provide higher anti-corrosion performance than 2280.
Ancamine K54 : Epoxy curing accelerator, the most common epoxy accelerator, light color, low dosage.
Anquamine 721, Anquamine 731, Anquawhite 735 : water-based curing agent, with self-emulsifying function, high brightness, high hardness, low oil level, light color, can be applied to floors with high environmental requirements such as DMP pharmaceutical factories and food factories.