Toluene diisocyanate manufacturer Knowledge Evonik Evonik Ancamine K54 Epoxy Accelerator

Evonik Evonik Ancamine K54 Epoxy Accelerator

Evonik Evonik Ancamine K54 Epoxy Accelerator

                                                                   

Product Introduction
Ancamine K54 curing agent is a technical grade product of 3-(dimethylaminomethyl)phenol, a general-purpose Lewis base catalyst for curing epoxy resins. It is used both as a curing agent (adhesive applications) and as an activator for other curing agents including amidoamines, amine adducts and polyamides (coatings, castings, floors, concrete and adhesive applications) ). It is also the preferred catalyst for liquid epoxy resin and liquid polysulfide mixtures for body solder, sealant and concrete adhesive applications. In addition, it is an efficient catalyst for epoxy resins cured with polycarboxylic acids and anhydrides (casting and lamination applications), as well as isocyanate/polyol and isocyanate trimerization reactions (isocyanurate foam applications).

Feature parameters

Appearance

Amber Color liquid

Color (Gardner)

6

Viscosity @2 5 (cP)

200

Proportion@25

0.980

Density (pounds/gallons )@25

8.1

Flashpoint (closed cup) ()

140

Free water content (Dean&Stark ) (%)

0.5

Typical purity (%)

97

Recommended grade (phr )

1 -15

As an accelerator

0.5 -5

for liquid polysulfide/Epoxy Curing Catalyst

5 -15

Typical Processing Performance
Cure Schedule 1; Catalyst — 10 phr
Pot Life (25g @ 25°C) (min) 40
  Heat Deflection Temperature (ASTM D648-264 psi) (°F) 90

Storage and Processing
Please refer to the Safety Data Sheet for Ancamine K54 Curing Agent.

Shelf life
At least 24 months from date of manufacture in original airtight container at ambient temperature. Keep in an airtight container away from excessive heat and humidity.

Typical curing schedule
1 hour at 80°C.

��Safety Data Sheet.

Shelf life
At least 24 months from date of manufacture in original airtight container at ambient temperature. Keep in an airtight container away from excessive heat and humidity.

Typical curing schedule
1 hour at 80°C.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1016

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search