Product Introduction
Takenate D-110N is a curing agent for aliphatic polyisocyanate synthesized from xylylene diisocyanate (XDI) dissolved in ethyl acetate.
Features
Good weather resistance, yellowing resistance and adhesion;
Aromatic polyisocyanate with better curability than TDI;
It is used in combination with resins containing hydroxyl groups such as polyols and castor oil, and is mainly used in coatings, adhesives, and sealing materials.
Status
Appearance |
Light Yellow transparent liquid |
ChromaG |
1 Max. |
solid content% |
75.0 ±1.0 |
Viscosity 25°C, mPa·s |
500 ±400 |
NCO content% |
11.5 ±0.5 |
FreeXDI Monomer% |
0.5 Max. |
Coating properties*
main agent |
Takelac U-27(polyester polyol) |
mixing ratio,NCO/OH molar ratio |
1.0 |
Acupressure dry,h |
2.4 |
active,h |
8 |
Adhesion |
100 /100 |
Erickson value,mm |
8 |
bending resistance,mm |
2 |
Impact resistance |
|
DuPont method,inch x g x cm |
1 /2 x 1000 x 50 |
Pencil Hardness |
H |
*The data provided here are only measured in general use and do not represent the specifications of this product.
Application
It can be used as a coating component for woodworking, furniture, interior decoration, vehicles, paper, plastic coating, outdoor protection, adhesives, sealants, ink adhesives, etc.
Precautions
Please refer to MSDS for health and safety related information of this product.