Products Description
TEGO Dispers 755W pigment wetting and dispersing aid. Wetting and stabilizing all pigments, can make the viscosity of the color paste is very low, good compatibility and storage stability, good weather resistance.
Utility
Item |
typical data |
Viscosity drops, organic pigments/carbon black |
5 |
Color Strength/Gloss, Organic Pigments/Carbon Black |
4 |
Viscosity drops, inorganic pigments/fillers |
5 |
Color Strength/Gloss, Inorganic Pigments/Fillers |
5 |
0=not applicable 5=highly applicable
suitable for Sex
Item |
typical data |
||||||||||
water-based |
suitable |
||||||||||
solvent type |
Not applicable |
||||||||||
two liquid type 100% |
Not applicable |
||||||||||
radiation curing |
Recommended dosage for co-grinding: 0.5-2.0%
Use Description Add grinding before dispersing
Recipe Recommendation 1. Add a rheology modifier to the inorganic pigment paste (such as gas phase two Silica) has been shown to be beneficial 2. A small amount of amine (0.2-3.0 %) to neutralize part of the acidic pigment surface is effective 3. In case of bubbles during the pigment dispersion process, you can use high-efficiency but also Compatible defoamer concentrates such as (TEGO® Foamex 8050, TEGO® Foamex 810, TEGO® Foamex 830) 4. The starting formula for making color paste is available upon request.
Chemistry Structure Aqueous solution of copolymer with high pigment affinity groups
Technology Parameters
Contact Food Suitability Additives/monomers/solvents are listed in Swiss Act 817.023.21 A and Table B, Annex 6
Save Security When stored in original unopened packaging, between +4 and +40°C , the shelf life of this product is at least 24 months from the date of manufacture. >
This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1106
|