Antistatic agentSN is a cationic surfactant, suitable for silk, polyester, The spinning of synthetic fibers such as nylon and chlorine fiber can eliminate static electricity and has excellent antistatic effect. Antistatic agent SN can be used alone, or it can be formulated into an aqueous solution with other oils and emulsifiers that do not contain anionic surfactants. The fiber bundles can pass through the above emulsion to eliminate static electricity. Dosage Generally it is 0.2~0.5% of the fiber weight. In the plastics industry, it can eliminate static electricity from plastic products and can be used as a static eliminator for polyvinyl chloride, polyethylene films and plastic products. Dissolve the antistatic agent SN in an appropriate solvent, mix it with a small amount of plastic powder, dry it, then add this material to all the plastic powder, and process it as usual. The recommended dosage is generally 0.5~2% of the weight of the plastic.
Antistatic agentB is a cationic surfactant. This series of products is soluble in general organic solvents and forms colloids in water. Used as anantistatic agent, emulsifier, rewetting agent, lubricant. Can be used in pesticides and herbicides, oil additives, and textile lubricants. Used as an emulsifier for water-based inks and cosmetics.
1. Antistatic agent B1 is used inside polypropylene and ABS Antistatic agent. Also used as an antistatic agent and preservative in steam generation and circulation systems.
2. Antistatic agent B2 is a special antistatic agent for plastics. It is an internal antistatic agent for polystyrene and polystyrene-acrylonitrile. It has good compatibility, heat resistance, stability, and significant non-toxic properties. It is mainly used in packaging films, daily plastic containers, and mining plastics. Pipes, polypropylene fiber, etc. For example: 0.25 parts of this product (containing 55% auxiliary materials) is added to 100 parts of high-pressure polyethylene to make a mining pipe. The surface resistance is stable at 108Ω, which meets the technical requirements of mining pipes. The washing machine liner is made by adding 0.3~0.5% of this product (including 55% of auxiliary materials) into polypropylene resin, which is not easy to stain and easy to clean. Also used as an oil emulsifier with antiseptic properties.
3. Antistatic agent B3 is used as an internal antistatic agent for polyethylene. The dosage is 0.5~2%.
微信扫一扫打赏
