The tube moisturizing agent produced by Anhui Yulong New Material Technology Co., Ltd. has a unified national retail price of 5 yuan/bag, and discounts are available for large quantities. You can consult. Before pumping, first take the required amount of clean dissolved water and pour it into the container, then add the pipe moistening agent (Pump Runtong) evenly and slowly, while adding Stir until all is dissolved, then let stand for 3 minutes, stir again and use. When using a truck pump to pump concrete, slowly pour the prepared lubricant solution into the hopper along the inner wall of the pump truck hopper and fill it with the pump tube inlet. Then start slowly pouring concrete into the hopper and start adding water at the same time. Carry out concrete and ready-mixed mortar pumping operations. The method is the same when using a ground pump, but attention should be paid to appropriately adjusting the dosage of the product and dissolved water. When using a ground pump, the total length shall not exceed 100 meters. If you need to use a ground pump exceeding 100 meters, purchase a special pump for ground pumps from the company. JH-RB pump lubrication general dosage preparation table
Transmission pump tube length Product dosage Dissolved water dosage
Below 65 meters 1 bag More than 30 kilograms
65m-100m 2 bags 60kg or more
100-200m 3-4 bags 150kg
How much does a pack of pipe moisturizer cost? How to use lubricant?
This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/11631