Toluene diisocyanate manufacturer Knowledge Ready-mixed concrete segregation site emergency products anti-segregation agent products Fujian anti-segregation agent manufacturers

Ready-mixed concrete segregation site emergency products anti-segregation agent products Fujian anti-segregation agent manufacturers

Ready-mixed concrete segregation site emergency products anti-segregation agent products Fujian anti-segregation agent manufacturers

Instructions for use of concrete anti-segregation agent. We developed an emergency material for mixing stations. It has the characteristics of rapid dispersion of water, rapid evaporation of water and other products that deal with moisture and chemical substances. It is mainly aimed at emergency treatment of special situations where the concrete slump is large or the concrete segregation cannot meet the construction requirements due to material changes and production control failure to follow up in time.
Usage
1, admixture Many resulting separation
2. Segregation of concrete caused by excess water
3. The fine aggregate suddenly becomes coarse and the powder content decreases sharply, resulting in concrete segregation or poor concrete workability.
4. The concrete itself does not segregate, but during concrete construction at the construction site, special parts with small concrete slump are required (for example: sloping roofs, sloped roads, stairs). Our products can also drastically reduce the concrete slump to meet construction requirements. . Not only can concrete be disposed of when it segregates on the construction site, but it can also be disposed of quickly if concrete is found to be segregated in the mixing station. It is quite convenient and fast, which greatly benefits the economy and time efficiency.
Usage method ( Adding amount):
1. 1Kg can adjust 10 to 12 cubic meters of concrete. Depending on the slump of the concrete on site, the dosage can be adjusted slightly. If the slump is small, you can add a little less. If the slump is large, you can add a little more.
2. Add our product into the concrete according to the dosage, stir the tank truck quickly for 1 to 2 minutes, and the concrete will return to normal state.

This product can be adjusted according to customer requirements, such as strength deviation, retardation Ingredients, water-retaining ingredients, dispersion properties, etc.



<img src="/upfile/202304/2023041334528065.jpg"/
This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/11646

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search