A brief analysis of the use methods and key points of Sichuan pump truck lubricant Guizhou concrete lubricant manufacturer

Blending, stirring, and applying, this is the initial use process of our pump truck lubricant. I believe everyone knows this process, but the specifics, such as when to pour it into the container, Do you know when to use it? Not sure, it doesn’t matter. Today we will lead you to understand the use methods and key points of pump truck lubricant. Are you ready?

How to use

When the concrete is transported to the construction site, add it to the empty hopper of the pump truck Appropriate amount of water (depending on the length of the pump tube, for a 50-meter long pump tube, use a pack of lubricant, add about 30 kilograms of water), add lubricant as needed, stir thoroughly (about 3-5 minutes), and let it sit for a while (3 -5 minutes) until the solution becomes viscous, then start the pump. When the lubricant solution is about to be pumped out, do not stop the pump, unload the concrete into the hopper, and then start pumping concrete. [The pumped lubrication fluid and a small amount of concrete must be excluded from the formwork]

Sichuan pump truck lubrication agent

Key points for use

1. First, make sure that the pump tube, pump hopper and connecting parts of the truck pump are sealed without leakage points;

2. After checking the pump pipe of the pump truck, flush the pump with clean water to ensure that there are no residues, debris and other blockages in the pump pipe;

3. When pumping concrete, the pump pipe lubricant solution should be discharged outside the concrete formwork first, and remember not to pour it into the concrete structure;

4. After the concrete and ready-mixed mortar pumping is completed, the pump pipes and pump trucks should be flushed with clean water in time;

5. Use this product If the product solution comes into contact with the skin or is accidentally sprayed into the eyes, rinse immediately with plenty of water. </p