Lubricant is used to replace the pipe mixing mortar before concrete delivery and pumping. At normal temperature, it can quickly dissolve in water and form a lubricating film composed of many micro-cations, thereby fully lubricating the thick surface of the inner wall of the pump.
Concrete pump lubricating agent is the general name for high-efficiency concrete pump pipeline agent.
Concrete pump truck pipeline agent is an innovative product that appears in the concrete sales market. Its key function is to lubricate the pipeline of the pump truck before underwater concrete to prevent pump clogging. For decades, water and cement mortar have been used in wet concrete delivery pumps in the nationwide ready-mix concrete manufacturing industry. The result is neither economic development nor in line with today's core concepts of green environmental protection, energy conservation and consumption reduction. The successful development, design and application of concrete pump truck pipeline agents have made positive contributions to the low-carbon, energy-saving and consumption reduction of the concrete manufacturing industry.
The key function is to lubricate the pipes of the pump truck before underwater concrete to prevent pump clogging. The underwater concrete agent of the concrete pump truck can significantly improve the concrete transportation and pumping capacity, reduce pipeline friction and pipeline friction resistance, significantly extend the service life of the pipeline, completely replace the wet pump cement mortar, reduce the process flow, and reduce the operation time. , with the advantages of anti-rust treatment, speed, convenience, environmental protection, and asset saving.
Concrete pump
The key is to moisten and lubricate the pipeline; reduce the collapse damage of concrete pumping. Because the dry test pipeline will absorb the cement mortar and moisture in the concrete pumping, especially in high-temperature seasons, the collapse of the concrete pumping will decrease rapidly, and finally the pipeline will be damaged due to the imbalance of the water-cement ratio of the concrete pumped. The road is blocked.
Does a lubricant need to be applied to the "concrete pump"? Processed
The use of pump runtong products can save about 230 yuan in pump cement mortar and vehicle transportation costs. Based on the total output of 200,000 cubic meters of concrete and 100,000 cubic meters of dry-mixed mortar, if the pump is operated 2,600 times a year, approximately 600,000 yuan can be saved each year.
Frequently asked questions about the application of lubricating agent for concrete delivery pumps:
1. There is no residue outside the delivery pump pipe.
2. Pipe connections should be tight and leak-free.
3. When the first truck of underwater concrete is filled with soil, the slump of the concrete should be increased by 2-3 cm.
4. In summer, water should be transported to reduce the temperature of the pipeline.
5. Do not pour underwater concrete agent discharged through pipes into reinforced concrete.
6. Before pumping concrete, be sure to ensure that there is no water in the pipeline to prevent diluent oil pumping.
7. If this product accidentally gets into your eyes, clean it with plenty of cold water first.
</p
微信扫一扫打赏
