Toluene diisocyanate manufacturer Knowledge Tips for using pump truck lubricant

Tips for using pump truck lubricant

Tips for using pump truck lubricant

Yulong pump truck lubrication agent is an environmentally friendly construction auxiliary material that can replace traditional cement mortar lubrication. Its appearance has caused the low efficiency of pump truck lubrication that has been troubled for many years. , the problem of high maintenance costs has been completely solved. In the actual use of pipe lubricant on pump trucks, many workers do not know the characteristics and usage of the product very well, resulting in the pipe lubricant not playing its intended role during use. Today, the editor uses this opportunity to make a simple and clear Let me give you a summary, I hope it can help you.

1. When purchasing lubricant, be sure to purchase lubricant from a big brand with a good reputation. The price of this lubricant will be higher than that of some inferior ones. Tube moisturizer is slightly more expensive, but the moisturizing effect can be said to be worlds apart. The quality of the lubricant depends directly on the quality of the lubricant. If you don’t know which brand is good, you can ask your colleagues around you.

2. Before moistening the pipe, make sure that the connection of the pump pipe does not leak slurry and that the hopper does not leak. If the hopper leaks, you can use local materials. Use yellow mud to plug leaks. After sufficient preparations have been made, start adding water to the hopper. If it is a sky pump, the water can probably cover two-thirds of the S pipe. After adding the water, start adding pipe lubricant materials into the hopper. Be sure to add it slowly. Add it into the hopper to prevent flocculation. While adding the lubricant, turn the pump truck back on and stir for seven or eight times. Let the lubricant solution stand for 5 minutes to allow it to fully dissolve. The effect will be better. After five minutes, , then turn on the reverse pump and stir for seven or eight times. At this time, the preparation of the lubricant solution is completed.

3. After the concrete tanker arrives at the construction site, it directly loads the material into the hopper. At this time, the concrete will sink and the lubricant solution will float. After the solution floods the eye plate, pumping begins. At this time, the lubricant solution flows from the front to the concrete and from the back. The lubricant solution discharged first from the pipe outlet must be discharged outside the formwork and cannot be poured directly into the structure. The concrete at the outlet will become Once normal, you can pour it.

If it is a ground pump, the usage method is the same as that of a sky pump, but the amount of lubricant needs to be increased, which is generally calculated based on a 25-meter pack. After the last construction of the ground pump, be sure to flush the pump pipes, especially at the elbows, where stones can easily accumulate. Since the lubricant is liquid, it is difficult to take the stones out the next time you moisturize the pipes. It may cause pipe blockage. Keeping pipes clean is a prerequisite for using pipe moisturizer. </p

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/11839

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search