Contents of this article
What kind of waterproof coating should be used to prevent water from penetrating from the top of the warehouse?
What situations is tpo waterproof suitable for?
What is type 902 waterproof oil used for?
What is the difference between waterproofing materials and asphalt?
What is the service life of polymer waterproof materials?
What kind of waterproof coating should be used when water penetrates from the top of the warehouse?
Use two-component waterproof materials
(1) When using two-component waterproof coatings, component A and component B should be stirred evenly before preparation, and then strictly follow the materials The material mix ratio provided by the supplier must be accurately measured; the quantity of each preparation should be calculated and determined according to the coating area each time, and prepared as needed; when mixing, pour component A and component B into the container and use a portable electric Stir vigorously with a mixer until evenly mixed and ready to use.
(2) Before using the one-component waterproof coating, just stir it evenly before use.
What situations is TPO waterproof suitable for?
Suitable for exposed or non-exposed roof waterproofing layers of buildings, and underground waterproofing of easily deformed buildings. It is especially suitable for lightweight steel structure roofs. With reasonable layer design and qualified construction quality, it can not only reduce the weight of the roof, but also have excellent energy-saving effects. It can also be waterproof and prevent condensation. It is ideal for roofs of large industrial plants, public buildings, etc. The preferred waterproof material.
It can also be used in waterproof and moisture-proof projects such as drinking water reservoirs, toilets, basements, tunnels, grain depots, subways, and reservoirs.
What is type 902 waterproof oil used for?
Waterproof. It is a domestically produced Lingpai type 902 waterproof oil and mechanical lubricating oil, which is very corrosive to rubber.
Waterproof oil is suitable for anti-corrosion treatment of various industrial and civil building roofs, basement waterproofing projects, anti-corrosion floors, air insulation layers and metal pipes.
Used for new brick, stone, concrete roofs, toilets, grain depots, water conservancy dams, water towers, swimming pools, tunnels, culverts, mines and other projects.
What is the difference between waterproofing materials and asphalt?
1. Different materials:
Asphalt: Main component: Asphalt Other components: Polymer modifier: SBS, APP Fiber: Polyester, glass fiber PE or PET protection Film, sand or rock flakes, aluminum foil protective layer.
Waterproof coating: Main ingredients: polymer film, thermoplastic polyolefin waterproofing membrane, based on thermoplastic polyolefin (TPO) synthetic resin combining ethylene propylene rubber and polypropylene, adding A new waterproof membrane made of antioxidants, anti-aging agents and softeners. Polyester fiber mesh can be used as internal reinforcement material to make reinforced waterproof membranes.
2. Different places of use:
Asphalt: widely used in waterproofing projects such as roofs, basements, toilets, etc. of industrial and civil buildings, as well as roof gardens, roads, bridges, tunnels, and parking lots. Waterproof and moisture-proof for swimming pools and other projects. For projects with large deformation, it is recommended to use polyester tire products with excellent elongation properties. For other buildings, relatively economical fiberglass tire products should be used.
Waterproof coating: It is very suitable as a waterproof layer for lightweight energy-saving roofs and large factories and environmentally friendly buildings. It can also be used in waterproof and moisture-proof projects such as drinking water reservoirs, toilets, basements, tunnels, grain depots, subways, and reservoirs.
3. Different waterproofing principles:
Asphalt: Asphalt has good hydrophobicity and can isolate moisture and vapor. After modification with SBS, etc., the stability of asphalt is greatly improved, making it suitable for various occasions.
Waterproof coating: Use a polymer film as an isolation layer to isolate water and moisture to achieve a waterproof effect.
What is the service life of polymer waterproof materials?
Polymer waterproof material products have stable performance under the action of ultraviolet rays, light, heat and oxygen, and the service life of the materials is more than 20 years.
Strong adhesion
The product has excellent adhesion to common building materials such as concrete base, glass, ceramics, plastics, metal, asbestos tiles, floor tiles and original waterproof material base surfaces. Good repair and bonding performance, extremely strong bonding force. It will not peel off or delaminate under the action of external force, and can form a stable waterproof whole.
Good permeability
Due to the good permeability of the material, the material can penetrate into the pores of the cement-based material when painting, blocking the water seepage channels, and the waterproofing effect is reliable.
Good elongation
The elongation at break of the product is ≥600%. It has excellent crack resistance and has a high shielding effect on cracks in the base layer, even if the base layer has minor cracks caused by external factors. cracks, breakage and leakage will not occur.
Good resistance to high and low temperatures
The product can withstand high temperatures up to 170°C without flowing, and low temperatures of -20°C without brittleness.
The products have bright colors
The products can be colored according to the design requirements and user needs, and have excellent thermal insulation and decorative beautification effects. Therefore, the product is a decorative and multifunctional waterproof material
Easy to construct
The product can form a continuous waterproof layer by brushing or scraping on any regular or irregular base surface. It can be constructed on wet base surfaces. The product does not foam, has good film-forming effect, and cures quickly, which can effectively shorten the construction period.
Wide range of applications
The products can be widely used in building roofs, basements, underground garages, indoor kitchens and bathrooms, boiling water rooms, balconies, exterior wall facades, board seams, and window edges. , window sills, column edges, trench pipes, as well as grain depots, water towers, swimming pools, tunnels, steel structure factory floors, power plant cooling tower inner wall waterproofing, etc., suitable for installation in building climate zones across the country.�. </p
微信扫一扫打赏
