UC-7735 Anionic polycarbonate polyurethane dispersion Translucent aqueous dispersion, suitable for textile digital printing applications

Model strong>UC-7735

Type strong>

Anionic polycarbonate polyurethane dispersion Body

Main Features

-small particle size

-translucent aqueous dispersion

-suitable for textile digital printing applications

Product Specifications

Physical properties	Value
Viscosity (23℃, mPa .s)	<1000
PH value	6-9
Non-volatile content （0.9-1.1g/ 1h/125℃, convection oven)	35-37
density (g/cm3)	about 1.1
average particle size (nm)	<85

Membrane performance

Performance	Value
100% modulus (Mpa )	3.8
tensile strength (Mpa) As is	49
Elongation at break (% ) as is	580
Volume swelling (%) - Water (16 hours at room temperature)	10
Melting range ℃ (unpaid Link)	215-230
lightfastness	7

Save

Store in original airtight container , Recommended storage temperature: 5-30 ℃, avoid freezing, heat and foreign substances. GENERAL INFORMATION: Once frozen unusable, the container must be adequately sealed, as by evaporation of water an irredispersible film is formed, brief heating up to a maximum of 50°C has no adverse effect on the properties of the product.

Material Safety

Material Safety Data Sheet for this product Sheets available upon request