Toluene diisocyanate manufacturer Knowledge Are there any good materials that can replace cement mortar for lubrication pipes?

Are there any good materials that can replace cement mortar for lubrication pipes?

Are there any good materials that can replace cement mortar for lubrication pipes?

Concrete pumping is an essential part of infrastructure construction. With the widespread application of concrete, a variety of pumping equipment has also been extended, such as ground pumps and truck-mounted pumps. It is relatively common for everyone. These pumping equipment need to lubricate the pipe wall of the pumping equipment before starting every day. Only after lubrication is good can the smooth progress of subsequent pumping work be ensured.

Most commercial concrete and construction sites use cement mortar or cement to moisten pipes. These two methods of lubrication have been used for decades, and the results are still very good, and they are deeply loved by the majority of pump fans. With the increasing awareness of environmental protection, these two methods of lubrication are becoming less and less suitable for the current development trend. These two methods of lubrication have three major disadvantages: they are not environmentally friendly, have high usage costs, and have safety hazards. In the past thirty years, which has been the peak period of my country's infrastructure construction, the demand for river sand in various places has been very large. Many illegal sand mining companies have illegally mined sand. In order to obtain more river sand, the river bed has been damaged and many river sands have been buried. Safety hazards, if a flood occurs, the consequences will be disastrous. If the use of river sand can be reasonably reduced, the mining of river sand will be reduced and the damage to the river bed will be smaller. In addition to not being environmentally friendly, the high cost of use is also another disadvantage of cement mortar lubrication. According to the current price of river sand on the market, it is more than 200 per cubic meter. Plus the price of cement and the transportation cost of concrete filling trucks, every time the pump is lubricated, The cost of using the tube is between 500 and 600. If the distance is long, the cost will be even higher. The use of cement mortar to moisten pipes also creates great safety hazards. The mortar itself has no safety hazards, but after the pipes are moistened, the mortar is poured directly into the structure. Which one has higher strength, concrete or mortar? Anyone with some common sense knows that according to construction regulations, cement mortar must never be poured into a structure, but why is it still done like this? In actual construction, there is no place to drain the mortar after lubrication. If it is drained outside the formwork, it will be very difficult to clean after the cement mortar has solidified. If it is drained outside the formwork every time it is lubricated, it will When the project is completed, it will pile up into a small mountain. Therefore, in order to save trouble, many construction sites pour directly into the formwork. We often see a lot of news, talking about a certain construction site, where the floor slabs and beams will fall off if they are lightly hit with a hammer. Do you dare to live in a house like this?

Is there a material that can replace cement mortar for pipe moistening? This is the pump truck lubricant that I want to explain to you today. The lubricant is a polymer instant material that has the characteristics of environmental protection, energy saving, money saving, time saving, labor saving, etc. As long as there is water at the construction site, it can be used Can lubricate the pump tube. As long as it is a lubricant produced by a regular manufacturer, such as some mainstream pump trucks on the market, a small package of fifty or sixty meter pump pipes can solve the problem, but you must choose a lubricant produced by a regular manufacturer. If you buy the lubricant produced by some small workshops on the market, in order to survive, they will choose industrial salt as filler to reduce costs. Just imagine how corrosive salt is to steel. It is absolutely no less Due to the safety hazards brought by cement mortar to project quality. The moisturizers produced by some small workshops are generally slightly cheaper than the moisturizers produced by regular manufacturers. If you are a conscientious company and a responsible company, you must choose a moisturizing agent produced by a regular manufacturer, not for anything else but for the safety of building quality!

</p

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/12406

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search