Concrete surface enhancer is a water-soluble liquid chemical that can generally penetrate 3-30mm into the concrete surface through full penetration. Its active ingredients can quickly react chemically with the free calcium in the concrete to form a gel substance. This increases the density of the structure and forms a solid entity on the concrete surface, thereby greatly improving the strength, hardness and wear resistance of the concrete surface.
Purpose of concrete surface enhancer:
1. Wear-resistant hardening: effectively improve the wear resistance of concrete components, prevent and cure sanding and loose concrete, and effectively improve the rebound strength of concrete.
2. Seal and dustproof: penetrate into the concrete for deep sealing, extend the service life of the concrete, and make the concrete easy to clean and maintain .
Applicable scope of concrete surface enhancer:
1. Painting new and old concrete floors, walls, and columns can increase strength, hardness, and rebound value by 10-25%. After 7 days of hardening and curing, it can increase by 40%.
2. Painting of various new concrete surface components and cement products with insufficient surface strength to increase strength, hardness and extend use years.
3. Reinforcement and repair of various dusty and sandy concrete components or cement components.
Construction method of concrete reinforcement:
It is recommended to use a roller brush for roller coating construction. Spray the evenly mixed Guwei concrete reinforcement onto the base surface and apply it evenly with a roller brush. When the water on the surface of the base layer evaporates and the surface becomes sticky or no clear water is visible, repaint in time to maintain the base surface.��Completely infiltrated and no longer penetrated, leave it for 5-6 hours. After the material is completely dry and absorbed, perform the second roller brushing, using the same method as above. It is recommended to apply it more than 2 times. </p
微信扫一扫打赏
