Yulong brand concrete pump truck lubricant – Pump Runtong instructions and methods for use

1. Product introduction

Concrete pump Runtong is a polymer that our company introduces German technology and cooperates with to produce Material. Pump Runtong can significantly improve concrete pumping capacity, reduce pipeline friction and pipeline resistance, significantly extend the service life of pump pipes, completely replace pump mortar, reduce processes, shorten operating time, and has the characteristics of rust prevention, fast, convenient, environmentally friendly, and economical. Funding and other advantages.

2. Application scope

Pump Runtong products are suitable for pumping concrete and various dry mortars Pump lubrication of on-site pump tubing. It has good adaptability to various grades of concrete and completely replaces the pump mortar of various pump pipes. Pump Runtong products can avoid pump clogging accidents of concrete pumps and on-site mortar pumps, reduce transportation vehicles, improve equipment utilization, and reduce the use costs of enterprises using ready-mixed concrete and ready-mixed dry mortar. Using Pump Runtong products saves time, effort and worry. It is a brand new pumping construction technology.

3. Usage

Before pumping, take the required amount of clean dissolved water Pour it into a container (the water temperature in winter should be above 5 degrees above zero), then slowly add Pump Runtong, stir while adding until all is dissolved, then let it stand for 3-5 minutes, stir again and it is ready to use. When using a truck pump to pump concrete, slowly pour the prepared Pump Runtong solution into the hopper along the inner wall of the pump truck hopper, and then start to slowly pour concrete into the hopper. After the concrete covers the feed port of the delivery pump, you can Start pumping concrete and ready-mixed mortar under pressure. The method is the same when using ground pumps and mortar pumping equipment.

JH-RB pump lubrication general dosage preparation table
Transmission pump tube length Product dosage Dissolved water dosage
Below 50 meters 1 bag 30±2 Kilograms
50m-100m 2 bags 60±5kg
100-200m 3-4 bags 140±10kg

IV. Key points for using the product

1. First, ensure that the pump pipes and connecting parts of the vehicle pump, floor pump, and mortar pump are sealed and have no leakage points;

2. After checking the pump pipe of the pump truck, flush the pump with clean water to ensure that there are no residues, debris and other blockages in the pump pipe;

3. When pumping concrete, the pump runtong solution should be discharged outside the concrete formwork first, and remember not to pour it into the concrete structure;

4. Concrete pump and pre-mixed After the mortar mixing pump is completed, the pump pipe and pump truck should be flushed with clean water in time;

5. Protective glasses should be worn when using this product. If the product solution is accidentally sprayed into the eyes, rinse immediately with plenty of water.

5. Analysis of economic benefits of using Pump Runtong

Using Pump Runtong products once can save money The cost of pumping mortar and transporting vehicles is about 230 yuan. Based on an annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed mortar, if the pump is started 2,600 times a year, it can save about 600,000 yuan a year.

</p