model WH-2940
type Waterborne Latent Isocyanate Dispersion
apply applied to one-component reactive polyurethane dispersion adhesive
Main Features
-One-component low temperature latent reactivity.
-Good water solubility.
-The film formed after drying has latent reactivity.
Product Specifications
Physical properties |
Value |
solid content (%) |
40 |
NCOcontent |
8.0 |
Appearance |
milky white liquid |
PH |
8.0-10 |
Recommendations
Due to the large specificity of curing agent particles, Particles will settle during storage and should be redispersed evenly before use. It is recommended to add a suitable thickener to adjust the rheological behavior of the mixture. The recommended dosage is 3-8% of the amount of polymer (polymer solid content 40-50%).
Save
Curing agent is sensitive to temperature, its processing and The storage temperature is recommended not to be higher than25 degrees, with the increase of transportation and storage temperature, gas will be released, This causes the pressure inside the container to rise.
Material Safety
Material Safety Data Sheet for this product is available upon request supply.