Solvent-based polyurethane adhesive SPS-2700A is suitable for cladding and vacuum forming of automotive interior parts

Products Description

Type Solvent-based polyurethane glue

Application Suitable for cladding and vacuum forming of automotive interior parts, including door panels, Armrest board, instrument panel, central control armrest, seat back panel, etc.

Performance Low activation temperature, high initial strength, good heat resistance

Technology Parameters

Project	Typical data
Appearance	White translucent liquid
Brookfield viscosity (25℃/50rpm/S3)	about 200mPa.S
Solid Content	about 16%
Curing agent (DS-2700B)	Isocyanic acid curing agent, adding ratio 3%-5%

Construction Conditions

Project

Typical data

2. Before spraying glue, the surface of the substrate must be dry, clean, dust-free and oil-free;

3. Spray at room temperature, use Spray gun for single-sided spraying or double-sided spraying; single-sided spraying requires pre-functional testing;

4. Only after drying Lamination or vacuum forming;

5. Waiting time after drying The longer, the higher the activation temperature.

Packaging

15kg/barrel, 0.75kg /canned (curing agent)

data Basics

Represented in the product data sheet All data are obtained in laboratory tests. Actual measurements may vary due to circumstances beyond our control.

Important Description

For transportation, operation, For information and recommendations on storage and handling of chemicals, users should refer to the actual Safety Data Sheet, which includes physical, ecological, toxicological and other safety-related data.

Legal Disclaimer

When the product is in normal condition When it is stored, processed and constructed correctly, the information provided by Haoyi New Material Company and the construction treatment suggestions given according to the actual situation are based on Haoyi New Material Company's good confidence in its current knowledge and experience. In actual application, due to the difference of materials, substrates and actual site conditions, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Material Co., Ltd.’s commerciality and support for its products Makes no warranties and assumes no liability of fitness for a particular purpose. Users of the product should test the suitability of the product for their application and intended use. Haoyi New Material Company reserves the right to change the nature of its products. The use rights of third parties shall be respected. All orders are subject to current sales and shipping terms. Users should refer to the latest version of relevant product manuals, which can be provided by Haoyi New Material Company upon request.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1508