Products Description
Type One-component solvent-based neoprene series adhesive
Application New environment-friendly adhesive
Has good bonding performance, good versatility, no need to deal with PP Bonding
Suitable for cladding with ABS, PP, hemp fiberboard, etc.
Performance Fast bonding speed and good adhesion to substrate
/span>
Products Parameters
Item |
typical data |
Appearance |
Light yellow liquid |
curing method |
moisture curing |
solid content |
100% |
viscosity |
about 200mpa.s |
specific gravity (20℃) |
0.85 |
Non-volatile components |
20.3% |
Technology parameter
Evaluation items |
SPS-2100 |
|
Peel Strength (N/25mm) |
Initial peel strength (within 30 minutes after production) |
6.5 BAF30/FMB70 |
Normal Peel Strength (20℃×65%RH×24h) |
8.2 FMB100 |
|
Hot Peel Strength (80℃) |
2.8 FMB100 |
|
Heat aging peel strength (after 80℃×2weeks) |
6.2 FMB100 |
|
Heat creep resistance (mm) (80℃×100g×24h) |
1.0 CF |
CF: Binder failure FMB: Skin material failure BAF: Substrate interface destroy
Construction Conditions
*PPE, PUF, PEF skin materials are acceptable
Use Method
1. Since this product is a moisture-curing product, the adhesive To prevent water or other solvents from mixing.
2. Use dry air to spray when coating, and use Teflon tube for delivery pipeline .
3. The product should be applied in a well-ventilated area.
Note
1. Because it is an organic solvent-based adhesive, be sure to pay attention to the fire source;
2. Store in a ventilated and dry place, avoid direct sunlight, and keep at room temperature Save under;
3. Wear safety glasses and labor protection overalls during operation. Penetration gloves of organic solvents and chemicals. When sticking to the skin, immediately wipe off the material in contact with the skin with a cloth, and then wash the skin thoroughly with soap and water;
4. Valid for 4 months.
Packaging and storage
Package: 14kg bucket
data Basics
All the data expressed in the product data sheet are obtained in laboratory tests . Actual measurements may vary due to circumstances beyond our control.
Important Description
For information and advice on transportation, handling, storage and disposal of chemicals, users Reference should be made to the actual Safety Data Sheet, which includes physical, ecological, toxicological and other safety-related data.
Legal Disclaimer
When the product is properly stored, handled and applied under normal conditions, Haoyi The information provided by New Material Company and the construction treatment suggestions given according to the actual situation are based on Haoyi New Material Company's good confidence in its current knowledge and experience. In actual application, due to the difference of materials, substrates and actual site conditions, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Material Co., Ltd.’s commerciality and support for its products Makes no warranties and assumes no liability of fitness for a particular purpose. Users of the product should test the suitability of the product for their application and intended use. Haoyi New Material Company reserves the right to change the nature of its products. The use rights of third parties shall be respected. All orders are subject to current sales and shipping terms. Users should refer to the latest version of relevant product manuals, which can be provided by Haoyi New Material Company upon request.
Direct exposure to light, stored at room temperature;
3. Wear safety glasses and labor protection overalls during operation. Penetration gloves of organic solvents and chemicals. When sticking to the skin, immediately wipe off the material in contact with the skin with a cloth, and then wash the skin thoroughly with soap and water;
4. Valid for 4 months.
Packaging and storage
Package: 14kg bucket
data Basics
All the data expressed in the product data sheet are obtained in laboratory tests . Actual measurements may vary due to circumstances beyond our control.
Important Description
For information and advice on transportation, handling, storage and disposal of chemicals, users Reference should be made to the actual Safety Data Sheet, which includes physical, ecological, toxicological and other safety-related data.
Legal Disclaimer
When the product is properly stored, handled and applied under normal conditions, Haoyi The information provided by New Material Company and the construction treatment suggestions given according to the actual situation are based on Haoyi New Material Company's good confidence in its current knowledge and experience. In actual application, due to the difference of materials, substrates and actual site conditions, it cannot be inferred from the information here or any written recommendation or any other suggestion that Haoyi New Material Co., Ltd.’s commerciality and support for its products Makes no warranties and assumes no liability of fitness for a particular purpose. Users of the product should test the suitability of the product for their application and intended use. Haoyi New Material Company reserves the right to change the nature of its products. The use rights of third parties shall be respected. All orders are subject to current sales and shipping terms. Users should refer to the latest version of relevant product manuals, which can be provided by Haoyi New Material Company upon request.