Toluene diisocyanate manufacturer Knowledge Hot-melt polyurethane adhesive SPH-8002 is suitable for bonding car roofs, door panels, carpets, spare tire covers, etc.

Hot-melt polyurethane adhesive SPH-8002 is suitable for bonding car roofs, door panels, carpets, spare tire covers, etc.

Hot-melt polyurethane adhesive SPH-8002 is suitable for bonding car roofs, door panels, carpets, spare tire covers, etc.

Product Description

Type Hot melt polyurethane adhesive

Usage

Suitable for car interior such as Fitting of door panels, armrests, seat back panels, etc.

Suitable for car roof and door panels , carpet, spare tire cover, etc.

Home appliance assembly, furniture, doors and windows , crafts, etc.

Performance

fast curing, high strength

No odor, no solvent evaporation

Adhesion to substrate Good

Technical parameters

Item Typical data
appearance

milky white solid

curing method

moisture curing

solid content

100%

density

1.15g/cm3

viscosity/130℃

40000±5000mPa. s

Activation temperature (°C)

75℃

Opening hours/25℃

about 10-15s

Initial strength (30s, PVC/ABS, 180°peel strength)

≥1.2 N/mm

Ultimate strength (3d, PVC /ABS, 180°peel strength)

≥2.5N/mm

Note: Test conditions and standards All are subject to the internal test method of the enterprise

How to use

1. The room temperature of the production environment should be Keep it at 10-40°C, and control the humidity at 30%~90%. 2. According to different materials and coating methods, the surface of the substrate can be preheated to different degrees, and the bonding effect is better

3. Apply hot melt glue Heat it to 120-150°C (subject to the actual glue temperature), and evenly spread it on the material to be bonded,

full Pressing for bonding

4. If the ambient temperature and Humidity is not ideal, heat preservation and moisturizing are required for post-curing moisture curing

Precautions

1. Must be opened as soon as possible Use to prevent skinning from moisture curing

2. Always pay attention to the weather The coordination of temperature change and glue temperature prevents insufficient activity of glue coating and false adhesion

3. Give as much as possible Press fit to ensure the best bonding effect

4. Pay attention to cleaning the equipment, Prevent dead glue skin from affecting the effect

Packaging and Storage

20KG, 190KG

Store at room temperature, pay attention to moisture

Data Foundation

Represented in the product data sheet All data are obtained in laboratory tests. Due to circumstances beyond our control, The actual measured data may be different.

Important Note

For transportation, operation, For storage and chemical handling information and recommendations, users should refer to the actual Safety Data Sheet, which includesIncludes physical, ecological, toxicological and other safety-related data.

Legal Notices

When the product is in normal condition When it is correctly stored, processed and constructed, the information provided by Haoyi New Material Co., Ltd. and the actual situation will be provided toThe construction treatment suggestions given are based on the good confidence of Haoyi New Material Company in its current knowledge and experience. In practical application, due toMaterials, substrates and actual site conditions vary and therefore cannot be relied upon by the information herein or any written recommendation or any otherIt is suggested that Haoyi New Material Co., Ltd. Make no warranty and assume any legal responsibility for the merchantability and suitability of the product for a particular purpose. Users of the product should test the suitability of the product for their application and intended use. Haoyi New Materials Co., Ltd. reserves the right to change its product propertiesquality rights. The use rights of third parties shall be respected. All orders are subject to current sales and shipping terms. Users should refer to The latest version of the product manual, Haoyi New Material Co., Ltd. can provide it according to the demand.

�When normal conditions are correctly stored, processed, and constructed, the information provided by Haoyi New Material Co., Ltd. and the actual situation will be given toThe construction treatment suggestions given are based on the current knowledge and experience of Haoyi New Materials good confidence. In practical application, due toMaterials, substrates and actual site conditions vary and therefore cannot be relied upon by the information herein or any written recommendation or any otherIt is suggested that Haoyi New Material Co., Ltd. Make no warranty and assume any legal responsibility for the merchantability and suitability of the product for a particular purpose. Users of the product should test the suitability of the product for their application and intended use. Haoyi New Materials Co., Ltd. reserves the right to change its product propertiesquality rights. The use rights of third parties shall be respected. All orders are subject to current sales and shipping terms. Users should refer to The latest version of the product manual, Haoyi New Material Co., Ltd. can provide it according to the demand.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1547

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search