Toluene diisocyanate manufacturer Knowledge Covestro Bayhydrol A 2846 Waterborne acrylate dispersion Recommended for wood coatings

Covestro Bayhydrol A 2846 Waterborne acrylate dispersion Recommended for wood coatings

Covestro Bayhydrol A 2846 Waterborne acrylate dispersion Recommended for wood coatings

Features

Self-crosslinking hydroxyacrylate dispersion. Binder for the preparation of waterborne one- and two-component primers and topcoats.

Supply Form About 40% in water, neutralized with amine

Features Data

Features Number Units of measure Method
Non-volatile component content
(1g/1h/125°C, convection oven)
about 40 % DIN EN ISO 3251
Viscosity, 23°C (D about 40 s-1) about 50 mPa.s DIN EN ISO 3219/A.3
pH
(1 : 3 diluted in deionized water)
about 7 DIN ISO 976

Other Data

Features value unit of measure method
density,20℃ about 1.1 g/ml DIN EN ISO 2811-2
Hydroxyl content (solvent free, calculated value) about 1.5 %

Features /app  

Bayhydrol® A 2846 XP is a self-crosslinking hydroxyl functional polyacrylate dispersion Body, developed for the preparation of one-component and two-component clears and surfaces as well as pigmented basecoats and pigmented topcoats. Coatings based on Bayhydrol® A 2846 XP have good chemical resistance, high film hardness, good early sandability and rapid pressure tack resistance. The chemical resistance of Bayhydrol® A 2846 XP can be improved by adding anionic hydrophilically modified polyisocyanates, such as Bayhydur® XP 2655. Bayhydrol® A 2846 XP can be formulated with polyurethane dispersions and other acrylic dispersions after testing for compatibility with specific products. Bayhydrol® A 2846 XP is especially recommended for wood coatings.

Save

- Store in sealed original Bayer MaterialScience containers.
- Recommended storage temperature: >0-30 ℃
- Protect from freezing, heat and foreign substances.
General information: This product is sensitive to freezing. Prolonged freezing will severely damage the product and cannot be restored. Prolonged storage at elevated temperatures will result in a decrease in viscosity and/or an increase in average particle size, possibly resulting in precipitation or condensation. Contamination with certain bacteria, molds or algae can render the product unusable.

Save Time

Bayer MaterialScience declares that the product is stored in full compliance with the above "Storage" clause Where required and properly handled, the product complies with the specifications or characteristic values ​​stated in the above clause "Specifications or characteristic values" (as applicable) within 6 months from the date of shipment stated on the transport document. The fact that a product exceeds the aforementioned 6-month period does not mean that it no longer complies with the values ​​set forth in the specifications or characteristic values. However, Bayer MaterialScience recommends that products older than 6 months from the date of shipment be tested before use to verify that they still conform to the stated values ​​in the specification or characteristic values. Bayer MaterialScience makes no promises and accepts no responsibility or liability for failure to conform to specifications or values ​​set forth in Characteristic Values ​​for products older than 6 months from the date of shipment.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1556

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search