Those of us who do decoration know that foam caulking products are often used when installing door frames. However, we will inevitably stick excess foam caulking on the door frames, so how to clean the foam caulking on doors and windows? The author introduces it to you.
Spray the detergent on the surface of the foam caulking first, and then use a shovel to remove it, which is more convenient. You can also use acetone for cleaning, which can effectively dissolve it, or you can add an appropriate amount of gasoline and use the same principle for cleaning.
Uncured foam has strong adhesion to skin and clothes, be careful not to touch skin and clothes when using. It is best to wear work clothes during construction. If it is stained on clothes, it will be difficult to clean. Clothesmay only font>Discard了. In case of contact with skin, rinse immediately with plenty ofwater Wash. Generallyconventional washing methods cannot wash it off, you must use Foam caulkCleaning agent can be used to wash it off. There are special cleaning agents for foam caulks in the building materials market.
Acetone is an organic compound with the same polarity as foam caulk. According to the principle of similar compatibility, the cleaning effect can be achieved. After the foam caulk is dry, use a razor blade or cut or scrape to removeRemove excess parts. If it gets on your clothes, put it in the sun for a few days and rub it with your hands after a few days. Foam caulk will slowly change color and turn pink when exposed to strong UV rays. But foam caulk can still leave stains on clothes.
Foam caulking can use high-concentration diluent——BananaWaterCleaning, but the material cannot be painted on surface, otherwise the paint color will be brushed off. After brushing off the foam, it will corrode for a while. 1~2After 2 minutes, use a brush to brush around, Bubble fell off. Finally rinse with clean water.
Foam glue stuck to clothes can be cleaned with toothpaste. The foam glue left on the door can be scalded with boiling water. Apply it with wind oil, wait for a while, and then wipe it clean, but The door will be more oil. Blow with a hair dryer to soften the adhesive and weaken its adhesion, making it easy to remove. If there are any small marks, wipe them with stain remover.
AboutThe author will introduce to you how to clean foam caulking on doors and windows. So many, how about it? I believe it can be of some help to everyone, right? If you want to know more about foam caulking, please pay attention to Shanghai Weigu.
Title of this article: How to clean foam caulking on door frames
Source of this article: http:/ /www.wellgo.com.cn/newb/information_2328.shtml
微信扫一扫打赏
