BYK -358 N
Polyacrylate based surface additive for solventborne coating systems and room temperature Cured plastic system for improved leveling. For moderately polar to polar systems.
Chemistry Composition
polyacrylate solution
Typical Materialized data
The data given on this data page are only typical values, not the technical indicators of the product.
| Density (20 °C) | 0.95 g/ml |
| Non-volatile content (10 min., 150 °C) | 52% |
| solvent | Alkylbenzene |
| Flashpoint | 47 °C |
special Note
The solvent-free version of this additive is BYK-361 N.
Apply Domain
paint Industry
Product characteristics and advantages: This additive is used for various solvent-based coatings Anti-cratering and leveling aid. Adds shine and gives the coat a long wave effect. Slightly reduces surface tension without affecting recoatability and intercoat adhesion. BYK-358 N does not cause clouding in clearcoats and does not cause haze in basecoats. The additive is thermally stable.
Suggestions Dosage
0.1-1% additive dosage (as purchased) based on the total formulation.
The above recommended dosage is for reference, the optimal dosage needs to be determined through a series of experiments .
Join Methods and processing instructions
The additive can be added at any stage of the production process, including post-addition.
room temperature curing plastic system
Product characteristics and advantages: This additive is used in various solvent-based, non-toxic Anti-crater and leveling aid for solvent systems. Slightly lowers the surface tension, which facilitates atomization or powder coating. BYK-358 N does not cause clouding of clearcoats nor haze of basecoats.
Recommended Purpose
This additive is recommended for various room temperature curing resin systems, for example, unsaturated Polyester resins and epoxy resins.
Suggestions Dosage
0.1-0.5% additive dosage (as purchased) based on the total formulation.
The above recommended dosage is for reference, the optimal dosage needs to be determined through a series of experiments .
Join Methods and processing instructions
The additive can be added at any stage of the production process, including post-addition.
微信扫一扫打赏
