Toluene diisocyanate manufacturer Knowledge Selection of solvents for water-based wood coatings

Selection of solvents for water-based wood coatings

Selection of solvents for water-based wood coatings

The basic composition of water-based wood paint

Similar to oil-based wood paint, the following factors contribute to water-based wood paint Orientation:

  • 1. System quick drying
  • 2. Appropriate rheology curve
  • 3. Leveling
  • 4. Single thin spray
  • 5. Good dispersion

Different from oil-based systems, the biggest difficulty in water-based systems is the lack of special filler directional additives. For example, it is difficult to find products similar to oil-based polyamide wax or oil-based polyamide waxes in water-based systems. CAB is an additive that has special effects on filler orientation. Therefore, water-based formulation workers must be more patient in screening additives on the market to meet the above five factors.

At present, with the introduction of major raw material suppliers Water-based wood paint raw material products are available, so R&D personnel can obtain a large number of recommended formulas for water-based wood paint. It is worth noting that foreign water-based wood paints have extremely strict requirements on construction processes and conditions during construction. Therefore, the formulas provided by foreign suppliers may have differences in their construction processes and conditions. It can obtain very excellent surface effects under certain conditions.However, domestic customers usually require oily construction standards. Therefore, it is usually difficult to obtain satisfactory performance or surface effects. Therefore, when customers refer to these formulas, they need to Understand this.


Selection of film-forming additives

Similar to the true solvent and co-solvent in solvent-based coatings, film formation in water-based systems Auxiliaries play a similar role and can also be classified accordingly. Regarding the drying of water-based paints, there is a classic evaluation: The drying of solvent-based paints is dominated by temperature and interfered by humidity; the drying of water-based paints is dominated by humidity and interfered by temperature.

Selection of film-forming aids and Matching is critical to paint performance. If a formula performs well, it is because of the film-forming additives; and vice versa. However, the process of volatilization of film-forming additives from the system is extremely complicated, especially for mixed solvents, and an accurate description cannot be given so far.

Related data on some film-forming additives (for reference)



Film-forming additivesBoiling point/℃Surface tension
(25℃)/(mN/ m)
Evaporation
(Bu AC=100)
Up to 90% evaporation time/sWater solubility/%Solubility of water in it/%
B Glycol monobutyl ether170.227.47.97000
Diethylene glycol monomethyl ether194.124.61.929400
Diethylene glycol monoethyl ether201 31.71-
Diethylene glycol monobutyl ether230.4300.4190000
Propylene glycol monomethyl ether12027.7163.5
Texanol24530.70.1335500000.9
EEP169.728.112-5.22.2
n-pentyl Propionate144.226.420-0.050.03
Water --30-- -
- -30-- -</table
This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/16273

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search