Toluene diisocyanate manufacturer Knowledge BYK 310 silicone surface additive

BYK 310 silicone surface additive

BYK 310 silicone surface additive

BYK-310


for solvent-free and solvent-borne coating systems, printing inks Silicone-containing surfaces for adhesive systems and room temperature curing plastic systems
Surface additives that significantly reduce surface tension. Thermally stable up to 210 °C

chemical composition


polyester modified polydimethylsiloxane solution


typical materialized data


The data given on this data page are typical values ​​only, not Product technical indicators.

Density (20 °C) 0.91 g/ml
Non-volatile content (10min, 150 °C) 25 %
Solvent Xylene
Flashpoint 25 °C

Storage and Shipping


The temperature is below 5 °C May develop stratification or cloudiness, Heat to 20 °C and mix well.


Application Information


Paint Industry


Features and Benefits: This additive significantly reduces the surface tension of coating systems, thereby improving substrate wetting and preventing cratering. Can increase surface slipperiness and improve gloss.
BYK-310 is a thermally stable silicone additive, which is different from traditional silicones. It is at 150 °C to 230 °C


Compared with silicone oil, this additive is safer to use. However, it should still be tested whether there will be foam stabilization problems in the corresponding system. Also test for recoatability and cratering propensity.

Adhesives and Sealants


Features and Benefits:BYK-310 is an efficient silicone additive. Significantly reduces surface tension, improving wetting of difficult-to-wet substrates.


Recommended Apps


Recommended for improving substrate wetting in epoxy adhesive systems wet.


recommended dosage


0.05-0.3 % Adjuvant dosage (as purchased) based on total formula.


The above data is the empirical dosage, the optimal dosage needs to pass a test series of tests determined.


Addition method and processing instructions


The additive can be added at any stage of the production process , can also be added later.


Special attention


Compared with silicone oil, this additive is safer to use. However, it should still be tested for other effects on adhesive performance.

room temperature curing plastic system


Features and Benefits:BYK-310 is an efficient silicone additive. Significantly reduces surface tension, improving wetting of difficult-to-wet substrates. The additive has high temperature thermal stability.


Recommended Apps


Recommended for use as primer for improving room temperature curing epoxy resin systems Wetting the material.


recommended dosage


0.05-0.3 % Adjuvant dosage (as purchased) based on total formula.


The above data is the empirical dosage, the optimal dosage needs to pass a test series of tests determined.


Addition method and processing instructions


The additive can be added at any stage of the production process , can also be added later.


Special attention


Compared with silicone oil, this additive is safer to use. However, it should still be tested whether surface defects occur in the respective systems.

/span>


The additive can be added at any stage of the production process , can also be added later.


Special attention


Compared with silicone oil, this additive is safer to use. However, it should still be tested whether surface defects occur in the respective systems.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1640

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search