Toluene diisocyanate manufacturer Knowledge BYK 306 silicone surface additive

BYK 306 silicone surface additive

BYK 306 silicone surface additive

BYK-306


Silicone-containing room temperature curing plastic systems and solvent-borne coatings The system uses a surface additive to significantly reduce the surface tension.
Excellent substrate wetting, anti-cratering and increased surface slip

chemical composition


polyether modified polydimethylsiloxane solution


typical materialized data


The data given on this data page are typical values ​​only, not Product technical indicators.

Density (20 °C) 0.93 g/ml
Non-volatile content (30 min., 150 °C) 12.5 %
Solvent Xylene/ethylene glycol monophenyl ether 7/2
Flashpoint 25 °C

Storage and Shipping


The temperature is below 5 °C May develop stratification or cloudiness, Heat to 20 °C and mix well.

room temperature curing plastic system


Features and Benefits: BYK-306 is a high-efficiency silicone additive, which can significantly reduce the surface tension, thus improving the resistance to wet Wetting of wet substrates. When used in pigment filled systems
Prevents Bernard vortices and improves leveling.


Recommended Apps


BYK-306 Recommended for polyurethane and epoxy systems.


recommended dosage


0.1-0.5 % Adjuvant dosage (as purchased) based on total Recipe


The above data is the empirical dosage, the optimal dosage needs to pass a test series of tests determined.

Addition method and processing guidance


The additive can be added at any stage of the production process , can also be added later.
The additive can be added at the end of production to avoid foam stabilization and has proven to be very effective.


Special attention


Compared with silicone oil, this additive is safer to use. However, it should still be tested whether surface defects occur in the corresponding system before large-scale use.


Paint Industry


Features and Benefits: This organosilicon additive significantly reduces the surface tension of the coating system and can effectively wet difficult-to-wet substrates. BYK-306 Improve protection against dust andAcceptance of paint mist and increase surface slip. The additive reduces the sensitivity of wood and furniture coatings to drafts and improves the orientation of matting agents.


Recommended Apps


This additive can be used in all solvent-based systems.


recommended dosage


0.1-0.5 % Adjuvant dosage (as purchased) based on total Recipe


The above data is the empirical dosage, the optimal dosage needs to pass a test series of tests determined.

Addition method and processing guidance


The additive can be added at any stage of the production process , can also be added later. For ease of dosing, the additive can be prediluted.


Special attention


Compared with silicone oil, this additive is safer to use. However, the foam stability, recoatability and cratering tendency should still be tested in the corresponding system before large-scale use.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1649

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search